Monthly Archives: December 2016

15Dec/16
Cisco router technical support number

How to Enhance the Range of Your Cisco Router?

The range of a Cisco wireless router is normally 33 meters or more. However many factors affects the range of Wi-Fi signal of your router. The main reasons of the interference are devices using the wireless frequencies like microwave ovens and cell phones, competing signals and metal etc. Contact +1-800-966-6991for Cisco Router Support Phone Number.

Cisco Router Support Phone number

You can boost the signal strength of your Wi-Fi router by following the methods given below:

Method 1:

Search for Disturbance

Replace the gadgets in your home that can affect the network traffic in the frequency range of 2.4 GHz. Purchase a wireless network analyzer which assists you in finding the source of disturbance. These appliances may be the reason of the problem such as: cordless phone, automatic garage door openers, television remote controls, security alarms, baby monitors, and microwave ovens. Check the signal strength of your router with these devices. Compare the power levels when each device is off and on to find if the Wi-Fi signals are weak.

Method 2:

Change Channels

Switch the channels of your signals. Routers can broadcast the channels between 1 & 11. You need to switch to that channel which provides a clear signal between different wireless networks.  

Method 3:

Deploy the 802.11n Standard

Modify the network broadcast mode of your router. If your router supports, then try by using the method 802.11 standard. The 802.11n standard provides much greater range and signal strength as compared to 802.11a/b/g.

Method 4:

Change the position of your router

Search a new place to position your router. If you are living in an apartment, then use a different channel as there may be various routers in working mode.

Method 5:

Upgrade the Hardware

Purchase and install a Wi-Fi Repeater.  A Repeater is a piece of hardware which works like a wireless network booster. The repeater accepts the signal from your router and boosts its Wi-Fi signal range.

Method 6:

Purchase a Wireless Booster

Add a wireless booster to your router directly. To boost your inward and outbound speed use a bi-directional booster.

Cisco router technical support phone number

Dial our toll-free number +1-800-966-6991any time, round the clock for quick online assistance for all the technical issues related to the Routers. If you are looking to contact Cisco router technical support phone number to resolve your problem, please get in touch with our Cisco Router support team to get the best customer support service at affordable charges.

14Dec/16

Set-up Process Of Default IP Address of a Belkin Router

It’s often seen that Home broadband routers generally come with two types of IP addresses –

belkin router support phone number

  1. First, connecting the IP address outside the internet.
  2. Another is for communicating efficiently inside the home network.

So, here internet providers will be working with the IP address for an outside connection. A private IP address for local networking is easily accessed by the router manufacturer and is properly controlled by the home network administrator.

Set-up Process Of Default IP Address of a Belkin router can also be done by Belkin Router Tech Support team by simply reaching out at Belkin Router Tech Support Phone Number. But as of now, below, here lets’ have our eye on the Belkin Factory Default IP Address setting process:

  1. Home routers will usually contain a default private IP address at the time of manufacturing
  2. It will be a specific value which entirely depends on the brand and the routers’ model.
  3. Next, 192.168.2.1 will appear as the default IP address of the Belkin router.
  4. It is essential for every administrator to know the IP address in order to smoothly connect to its console. Pointing the web browser at “http://192.168.2.1/” address from any device connected to the router is defined to set with this address.
  5. This address is commonly known as the default gateway address. One of the genuine reasons behind this is that the client device directly relies on the router as their gateway to the Internet.

A Process To Change The Router’s Default IP Address

  1. Similar private network address will be used each time the home router power will be turned on, unless it’s the case where an administrator chooses to change it. In this case, changing of the router’s default IP address is necessary to avoid any conflicting situation of an IP address with an Internet modem or another router which is already installed on “192.168.2.1” IP address.
  2. Changes made in the router’s default IP address will not at all affect the router’s other administrative settings like Domain Name System (DNS) address values, network mask (subnet mask) or passwords.

Few Descriptions About Router Reset and Default IP Addresses

The router reset will replace its network settings which include its local IP address with the manufacturer’s default IP address. Even if it’s the case where an administrator has completely changed the default address, resetting the router will change it back. Resetting a router is done in rare situations where a unit was updated with few incorrect settings like botched firmware upgrade which might be the reason to stop responding to administrator connection requests.

Our Belkin Router Support Phone Number service is available for different group of customers using different kind of routers worldwide. We work 24 hours to meet their daily demands for various workings issues faced by them. We believe in customer satisfaction and have the best track record of the highest success rate to identify customer’s problem and solve them instantly with successful results.

Belkin Router Customer Service Number

If you are looking to contact Belkin Router Customer Service Number +1-800-966-6991 for online assistance to resolve your problems, you can call us on our toll-free number and we will get back to you via online tech support service with the best customer care support solution at very reasonable charges.

10Dec/16
router technical support number

Tips to Connect Two Routers through Ethernet

Connecting two routers can significantly enhance the performance of your home network. By combining two routers, you can create a network that covers your entire house, and even make sub networks to safeguard your kids online. If your router is compatible, you can set it as a bridge that will increase the range of your wireless signal. If you need to Connect Two Routers through Ethernet call our toll-free number +1-800-966-6991.

router technical support phone number

Check which router to make the main and the secondary router

Keep both routers near your PC. Connect your main router to your modem, and then connect your PC to the router through Ethernet. Since this router will be managing the connection to the web, setup it as a primary router. To access the routers you can enter the address 192.168.2.1, 192.168.1.1, or 192.168.0.1

Choose between the LAN to WAN or LAN to LAN connection

If you are making LAN to WAN network, set the main router’s DHCP address between 192.168.1.2 and 192.168.1.50. If you are building a LAN to LAN network, set the DHCP settings to default.

Connect primary router to the modem and connect your PC to the router through Ethernet

Now connect the PC to the secondary router. If you are building the LAN to LAN network, modify the IP address so that it is similar to the first router; also increase the last digit by one 192.168.1.1 can 192.168.1.2. If you are creating the LAN to WAN network, edit the IP address so that it is similar to the first router, and increase the last digit by one 192.168.1.1 will be 192.168.2.1.

Now connect the PC to the secondary router

If you are creating the LAN to WAN network, modify the WAN IP address of the secondary router to 192.168.1.51. If you are building the LAN to LAN network, the DHCP service must be switch off on the secondary router. If you are making the LAN to WAN network, the DHCP server on the secondary router must set between 192.168.2.2 and 192.168.2.50.

router-call

Dial our toll-free router tech support number +1-800-966-6991 any time, round the clock for quick online assistance for all the technical issues related to the Routers. If you are looking to contact router customer support number to resolve your problem, please get in touch with our Router support team to get the best customer support service at affordable charges.