Monthly Archives: March 2019

21Mar/19

Troubleshoot Linksys Error Code 323: Useful Tips And Tricks

The Linksys error code 323 appears when the router is not detected by the setup disk. This error code also occurs due to the improper configuration of the network. On the other hand, a corrupt registry entry is also responsible for the error. Moreover, the corrupted setup disk can also cause error code 323. Additionally, the configuration of the IP address is another troublesome factor of this annoying situation. Sometimes, you might encounter this error after changing the password of the router.

If you are in the same situation, then this article will help you to resolve the issue. It is a common error. So, using some simple hacks can help you to overcome this issue quickly. This post includes several guidelines in order to fix the error 323. So, go through them.

Easy Troubleshooting Methods to Resolve the Linksys Error Code 323

If you are getting the Linksys error code 323, you can find all the possible steps here in order to solve the issue. So, if you are searching for reliable solutions, just go through the next section and try them accordingly.

Fix 1: Use the Web-Based Setup Page

The first thing that you should try is to configure the web-based setup page manually. To perform the action, go through the following section.

  • At first, launch a web browser and enter the IP address of the router in the address bar. Press the Enter button. If the IP address does not work properly, then you need to check the IP address from the official website of the Linksys router.
  • Now, put the login credentials appropriately in the blank space. Also, enter the default password.
  • After that, the web-based setup page of the router will appear on the screen automatically. If you are using Linksys Smart WiFi router, then the login page will appear differently.

After completing the process, check whether the error code still appears or not.

Fix 2: Run the Installation CD

Try to run the installation CD and check the cable that is connected with the computer and the router as well. Insert the setup CD in the proper away and check whether it is working properly or not.

Fix 3: Setup Router Without Installation CD

Another effective solution is to set up the router without the installation CD. To do so, follow the instructions that are stated here:

  1. At first, connect the system with the Ethernet port on the router and modem as well. Now, check the light of whether it is blinking properly or not.
  1. After that, open the setup page of the Linksys router and try to change the settings of the Internet connection manually.
  1. In the setup page, users can easily change the settings of the router. Now, enter the IP address of the router. Then, enter the username and password properly to log into your account.
  1. Finally, wait until the computer accesses the internet to create a wireless network. After successfully creating the wireless network, check the status of the error code.

Fix 4: Repair the Corrupted Files

A corrupted system file also creates error code 323 effectively. Therefore, you need to run the system file checker to locate the corrupted apps and repair them accordingly. To perform the steps, go through the following section:

  1. At first, click the Windows key and open the Start menu. After that, type ‘cmd’ in the search bar to open the Command Prompt on your device.
  1. Right-click on it and select Run as Administrator from the list that will appear on the screen. It will help you to open the Command Prompt in the Administrator mode. Now, type ‘sfc/scannow’ in the command box and hit the Enter button.
  1. It will identify the corrupted files and repair them easily. Finally, connect the router with the system and try to connect it. Check whether any error code appears on the screen or not.

Fix 5: Run the System in the Safe Mode

Another effective solution is to run your device in the Safe Mode. Hence, you need to try this method once. Perform the following steps in order to run the system in the Safe Mode.

Step 1

At first, switch off the power button and then turn on the system again. Now, press the Esc button from the keyboard continuously. When the system awakes, you will find three option.

Step 2

Choose the third option which says Safe Mode with Networking option and click on it. Now, your device will open in the Safe Mode. Try to install the router and check whether the error code still appears or not.

Fix 5: Disable the Antivirus Temporarily

Sometimes, simply turning off the antivirus might solve the issue. Hence, you need to disable the antivirus temporarily. To do this, launch the antivirus software on your device and move to the Settings option. Now, search for the option Turn off/on the Antivirus.

Turn off the antivirus by switching the toggle button. Restart the system and see the status of the error code.

Fix 6: Update the Windows Operating System

After performing all the steps, if the error code still persists, then you need to update the Windows OS. Hence, you need to check the Windows version. If any update is available, then download it accordingly. Follow the steps that are mentioned here to do so:

  • First of all, press the Start button and type ‘Control Panel’ in the search bar. From the Control Panel option, locate the Update and Security option.
  • A new window will pop-up on the system’s screen. Click on the ‘Check for the update’ option to download the updated version.
  • Download the suitable update for the Windows and install it on your device. Follow the on-screen instructions to proceed further.
  • Once you are done with the steps, restart the system and check whether the error code still persists or not.

Concluding Remarks

By following these effective methods, one can easily troubleshoot the Linksys error code 323. Hence, without wasting any time, just apply the steps and solve the issue without any difficulties. Nevertheless, if you face any problem while performing the steps, just post your queries in the comment section below.

20Mar/19

How To Setup Belkin Router – A Comprehensive Guidelines For You

Belkin is one of the world famous wireless device manufacturers. It provides different types of routers with extraordinary features and excellent functionalities. And thus, users accept these routers gladly. However, you can’t enjoy a hassle-free internet connection if you are not aware of the setup process. We are going to explain all the effective ways of setup in this article. So, let’s learn how to Setup Belkin router within a short period of time.

How to Setup Belkin Router – Simple Ways

You can configure the Belkin router in different ways. Moreover, you can connect two different Belin routers as well. Besides this, you can create a trouble-free connection between a modem and the Belkin router without encountering any severe issue. So, follow the methods given below to know how to setup Belkin wireless router and make a secure internet connection.

Power Cycling the Modem and Router

  1. Unplug the modem and the Belkin router from the power source.
  2. Now, connect the Ethernet cable from the modem to the WAN as well as to the Internet port of the router.
  3. After that, turn on the modem and plug them back to the power source.
  4. Finally, turn on both the modem and router to establish a hassle-free internet connection.

Setup Belkin Router Individually

  1. First, connect the PC to the Ethernet port of the Belkin router and open a web browser from your PC.
  2. After launching the web browser, type the router’s default IP address “192.168.1.1” in the address bar and hit the Enter key to proceed.
  3. Now, click on the Submit button by leaving the password field blank. This way, you can open the router’s web-based setup page on the screen.
  4. Next, click on the Internet WAN and choose Connection Type option from this section. Then, select the appropriate connection type and tap on the Next button.
  5. Finally, enter the correct Network setup details into the specific fields and hit the Apply Changes button to save the new changes. When you see the message, “Connected” then make sure that the connection is established successfully.
  6. Now, close the page and try to launch a website by entering the correct URLs in the address bar. Verify whether it can generate the results or not.

Methods to Create a Connection Between Two Belkin Routers

  1. Connect the Computer to the LAN or wired network of the main Belkin router.
  2. Now, launch the browser window by tapping on its icon and open the router setup page by using the Default IP address.
  3. After submitting the router’s login credentials, click the Submit button to confirm the Router sign-in process.
  4. Next, go to the LAN settings section and note the LAN/WLAN address under it.
  5. Click on the Wireless tab from the resultant window and tap on the Wireless Bridging option.
  6. After that, turn on the Wireless bridging by placing a tick on the checkbox says, “Enable Wireless Bridging”. Now, click on another checkbox entitled with “Enable ONLY Specific Access Points to Connect”.
  7. Then, copy the LAN/WLAN address that you took earlier and paste it into the AP1 field.
  8. Finally, hit the Apply Changes button and repeat the above steps again in case of the second Belkin router to create the connection.

Bottom Line

In this content, you will get a clear idea of how to setup Belkin router within a short period of time. Moreover, you can understand the process to create flawless connectivity between multiple Belkin routers and extenders. So, we hope this article will help you to bring perfection in Belkin wireless devices setup program and enjoy a trouble-free connection for a long time. If you have any other queries, leave a comment. In case you face any complication, simply contact the router manufacturer.

17Mar/19

Is Your Dlink Router Not Working? Implement Proven Methods To Eradicate The Error

Dlink is one of the global networking company who delivers high-quality router. Dlink routers offer a great user-friendly interface that makes it more reliable. Despite its brilliant features, you may encounter Dlink router not working error quite often. This particular issue not only occurs with the old router but sometimes even after purchasing a new router, users face the same error. You will not be able to connect to the internet if the error appears.

Unfortunately, if you are also encountering the same issue then this is the right place to get rid of the problem without any delay. In case you are unaware of the solutions, then this article is the ultimate choice of yours. Follow each and every solution and fix the problem on your own.

Dlink Router not Working? Know the Probable Reasons

There are several causes that are responsible for encountering this router not working issue. Hence, it is necessary to find out the reasons in order to resolve the problem efficiently. Therefore, take a look below:

  • By any case, if you are connected with an unstable network then it is quite possible that your Dlink router stops working. An unexpected breakdown of internet connectivity restricts you to work properly with your router.
  • If there is any hardware related problem with the LED or the router, then also you can face the same issue. On such case, you have to go to the login page and check the status of your router as well.
  • Due to any problems with the power supply such as hardware impairment with the power cable can also be the reason for Dlink router not working issue.
  • If your device gets attacked by virus or malware then it is pretty possible that you can also encounter the same glitch with your Dlink router.

Easy ways to Repair when you find Dlink Router not Working:

Here in this section, we are going to discuss some effective methods that can help you to solve the issue. Have a deep look at the entire section and follow one by one.

Solution 1: Basic Troubleshooting

This is the primary method to fix the issue quickly. The first and foremost thing that you have to do is to, detach the power cable and keep waiting for 30 seconds and then plug in the cable again. Now, you have to restart your router for the first time. After a few minutes, switch on both of your router and the computer. Finally, check if your Dlink router is now working or not.

Solution 2: Check WiFi Security Settings

In case if you are using a wireless router then this is the perfect solution to fix the Dlink router wireless not working issue. But if you are using wired router then it is recommended to ignore the steps.

  1. First of all, tap on the Wireless option and then choose the Encryption.
  2. After that, click on the drop-down arrow and choose Security Mode as well.
  3. In case if you find the option is selected as disabled then you have to enable it.
  4. Now, select one of the menus such as “64bit WEP,” “128bit WEP,” “WEP/PA2-Personal,” “WPA PSK” or the “WEP” or “WPA” mode.
  5. At the last step, navigate to the Taskbar and select Wireless option. Then, you have to click on the “Connect” icon and also verify if the problem with the Dlink router gets fixed or still showing.

Solution 3: Create a new Connection with Dlink Router

In case if the above methods are not helpful for you then follow this one.

  • At first, you have to do is to, execute the Dlink router login.
  • Then, choose the adapter settings option by clicking on it.
  • Now, disable that icon and enable it for once more time. It will help you to solve the issue.
  • Afterward, you need to set up both the IPv4 and Internet Protocol to Automatic.
  • Now, exit from the present window and check if you are still getting the same or not.

Bottom Line…

We assume that this entire tutorial will guide you to get rid of the Dlink router wireless not working issue. But if you still need any further help then we recommend you to consult with an expert and get the most proficient tricks. Moreover, you can also leave your valuable feedback in the comment box that is given below.

17Mar/19

Troubleshoot And Fix Linksys Router Setup Error 302 With Smart Solutions

If you are a Linksys router user, then error 302 is a common problem for you. This error notification mainly appears at the time of reinstalling any of the setup software. There are numerous reasons behind this error. The problem with an internet connection is one of the major reasons for this error. Sometimes, the problem might appear due to the internal hardware issue. If you are dealing with this kind of situation, then this guide is for you. Here, in this article, we are going to discuss the steps that can help you to fix your problem with Linksys router setup error 302. So go through the upcoming part of the article to know the details on it.

Easy and Quick Solutions to Fix Linksys Error Code 302:

So, here we are going to provide you all the possible solutions that can help you to fix your problem with Linksys error code 302. Let us move on to the solution part and follow the instructions provided there to get rid of the problem on your own.

Fix 1: Reset the Linksys Router

If you are in trouble with Linksys router setup error, then you should reset the Linksys Router. In case, the procedure to reset the Linksys router is unknown to you, then follow the steps at the bottom of the article.

  1. At first, you need to press and hold the Reset button for a few minutes.
  2. Then, detach the Power cord from your router and wait for a few seconds. Thereafter, again, re-enter the power cord in the device.
  3. Thereafter, check the configuration settings of your router. If you find any problems with the configuration settings, then you should change it with its proper settings.
  4. Then, check if the problem is resolved or not.

Fix 2: Modem Settles

The problem might get fixed by settling the Linksys Modem. If the steps are unknown to you, then you can follow the steps that are written below.

  1. At first, you need to connect your router with a computer.
  2. Thereafter, launch the web browser as per your preferences.
  3. Then, move your cursor to the address bar and write down the default IP address of your router.
  4. After that, the Linksys router setup page will appear on your screen.
  5. Furthermore, you need to proceed with the next step by log in with the administrative account of the Linksys router. Further, enter the username and password in the provided space.
  6. Then, move on to the Mac Address Clone subtab from the setup page. Click on the Cloning option to clone the Mac address.
  7. At the next step, click on the Save button to save all the changes that you have made.
  8. Thereafter, turn off your Linksys modem and the router. Then, again turn on your modem.
  9. Now, wait for a few minutes to settle down your router.

Fix 3: Change the Web Browser Settings

You can get rid of the Linksys router setup error 302 by changing the web browser settings of the system. Sometimes, the problem might occur due to some misconfiguration in your web browser settings. The methods that are mentioned in the following part of the article will help you to do so.

How to Change the Configuration Settings of the Google Chrome Browser?

If you are a Google Chrome user, then follow the steps as it will help you to configure your browser settings.

  • At first, you need to launch your Chrome browser by clicking on the Google Chrome icon from your desktop.
  • Then, click on the Customize and control Google Chrome icon from the top of the right side of your computer screen.
  • Thereafter, click on the Settings option and change the required settings.
  • Now, check if the problem is resolved or not.

How to Change the Configuration Settings of the Mozilla Firefox users?

The Mozilla Firefox users might follow the steps that are written in the upcoming part of the article. You can go through the steps that are written below:

  • At first, click on the Mozilla Firefox icon from your desktop to launch it.
  • Then, click on the Open menu icon from the top of the right corner of your computer screen.
  • Thereafter, click on the Options button and follow the instructions as per guided by the onscreen prompts. Then, verify your system to check if the problem is resolved or not.

Fix 4: Reboot the Linksys Router

If you are still dealing with the same problem, then you should reboot the Linksys router. The following steps will help you to reboot your Linksys router. Follow the steps one-by-one.

  1. At first, you need to open your preferred web browser and enter the router’s IP address in the Address bar. Otherwise, you can type “myrouter.local” in the search bar and hit the Enter button.
  2. Then, go to the Router Settings option and click on the Troubleshooting icon.
  3. After that, click on the “Diagnostics” tab, then select the Reboot link.
  4. Thereafter, move your cursor to the “Important pop-up” box and click on the Yes button. Then, the “Router Reboot pop-up” box might appear on your screen. Further, you should click on the OK button to complete the procedure.

Fix 5: Disable the Third-Party Antivirus Application

If you failed to do all the methods that we have described in the previous part of the article, then you should disable the third-party antivirus applications from your computer. Sometimes, the problem might arise due to the confliction with the third-party security software and the system programs. So, you can get rid of the problem by disabling the third-party antivirus software from your computer. To disable the third-party software from your system, you can follow the steps that are mentioned in the upcoming part of the article.

  1. At first, select the third-party software that you need to uninstall from your computer.
  2. Then, right-click on it and select the Open button to launch it.
  3. Thereafter, go to the Settings option and click on it.
  4. After that, search for the Turn On/ Off option. Then, toggle the button to disable it. Then, check if the Linksys router setup error is fixed or not.

Wrapping Up

Through this article, we have tried to present all the possible solutions that can help you to fix your problem with Linksys router setup error 302. In case, you have any more question regarding this topic, then you can comment us on the comment section below.

17Mar/19

Get Instant Hacks To Resolve Linksys Router Error 321

Linksys router error 321 is one of the most common technical glitches that are encountered by most of the users.  Generally while trying to install the Linksys router with the help of the installation CD, the error pops up. This error displays with a message that the system is not attached to the router properly or the link between the system and the router is not working properly. Moreover, if any third party security software is installed on the system then this error code also appears. Sometimes, due to the corrupted Windows system file can also be the cause of this error code. So, if you are also struggling with this error code then stick to this article. Here, we are going to tell you all the procedures that can help you to get rid of the error 321 occuring on the system.

Procedures for Eradicating Linksys Router Error 321:

When you try to install the Linksys router on the system, at first, it is essential to reboot the system. After rebooting the system you need to install the Linksys router and then check whether the problem is still there or not. If not, then you can follow the under mentioned procedures to fix this problem on your computer.

Procedure 1 – Check the Connection

After getting this error code on the system, you need to check whether the connection between router and system are properly connected or not. Sometimes, due to a loose connection the error 321 arises. So, you have to disconnect all the connection and then reconnect it again. After reconnecting this, try to install the router with the CD and then check whether the error code is fixed or not.

Procedure 2 – Run the Installation CD Again

When you encounter the Linksys router error 321 on the system you need to again run the installation CD. Simply remove the CD and restart the system. After restarting the system, again insert the installation CD in the CD port and then try to run it. If still the error persists, follow the next method.

Procedure 3 – Turn off Windows Defender Firewall

Sometimes, the Windows Defender Firewall can prevent the router from installing correctly. Before installing this, you have to turn it off. Follow the instructions which are cited below:

  1. At first, hold down the Windows key and press the S key to open the Search Panel.
  2. Type Control Panel in the Search box and then hit the Enter button on the keyboard.
  3. From the Control Panel application, double-click on the Windows Firewall section.
  4. In the Windows Firewall window, click on the Turn Windows Firewall On and Off option on the left side panel.
  5. On the right side window, go to the Public Network Settings and Private Network Settings section and then click on the Turn off Windows Firewall button from both. After that, you can see the OK option, click on it to save it.
  6. Once done, you can try to install the router and then check whether the error code persists or not.

Procedure 4 – Remove the Security Software

If the security software is installed on the system then you can get the Linksys router error 321. So, you should uninstall the security software from your computer. To uninstall it follow the instructions which are given below:

  1. First of all, press the Windows button and X key together to launch the WinX menu list.
  2. In the WinX Menu list, you can see the Control Panel application, select it.
  3. When the Control Panel window opens, double click on the Programs and Features tab.
  4. Find the Security software, select it from the Programs and Features window. After that, select the Uninstall option to remove it. Now the uninstallation process has begun.
  5. Once the task is completed, reboot the device and then check if the error code has been fixed or not.

Procedure 5 – Update the Windows Operating System

Due to the older version of the Operating System, this error code can occur on the system. So, when you try to install the router you should check whether the Operating System is updated or not. If not, then immediately update the system. To do so follow the steps:

  1. At first, you need to open the Settings application by pressing the Windows button and I button.
  2. When the Settings application opens, you will see the Update and Security section, double-click on it.
  3. In the Update and Security window, go to the left side menu list and select the Update tab.
  4. From the Update tab, you will see an option Check for updates option, click on it to check whether the update is available or not.
  5. If yes, then you will get a button Update, select it to begin the update.
  6. After completing the update process, restart your computer and try to install the router.

Procedure 6 – Configure DHCP connection

This is an alternative procedure that you can use on the system to fix the Linksys router error 321 on your computer. Hence, follow the steps:

  1. Firstly, disconnect the Linksys router from the Power supply.
  2. After that, press the Windows Key and R button to open the Run dialog box.
  3. Type Ncpa.cpl and then click on the OK option or hit the Enter button.
  4. Next, select the Local Area Connection button.
  5. In the Local Area Connection Properties window, move the cursor to the Networking tab, select it.
  6. After that, click on the Internet Protocol Version 4 button to open the Properties window.
  7. When the Properties window opens, select the ‘Obtain an IP address automatically’ and ‘Obtain DNS server address automatically’ button. Then you need to select the OK button to save it.
  8. Once you are done with these steps, connect the Linksys router to the Power supply and then try to install it again.

Procedure 7 – Reset the TCP/IP Settings

By resetting the TCP/IP Settings you can easily fix this error code on your PC. To reset it follow these directions:

  1. Go to the Search Panel, type Command Prompt and right click on it.
  2. Select the Run as administrator button from that list.
  3. Type ‘Netsh int ip reset default.txt’ in the Command Prompt window and then hit the Enter key to reset the TCP/IP settings.
  4. After completing this, reboot the device.

Procedure 8 – Install the Linksys Router without Installation CD

If the above-mentioned procedures did not work out then you can try to install the router without the installation CD. If you install the router without this, then chances are higher to resolve this error. So, try the steps mentioned below:

  1. Firstly, you need to connect the system to the router’s Ethernet Port and another cable you can connect the modem to the router’s Internet port.
  2. Next, visit the Linksys router official page and enter the Model Number of your router.
  3. After that, download it and then install it.

Hopefully, the above-mentioned procedures will enough to get rid of the Linksys router error 321. After reading this article, you can quickly eliminate this error code from the device. So, do not waste any time, do these steps on your PC in order to fix this error.

07Mar/19

Easy Two Ways To Resolve The Linksys Error 2112

Linksys error 2112 is the most frequent and general error that a lot of Linksys router users have faced. This annoying error code will arise whenever there is a technical glitch to Linksys cloud access, which results in making alterations in the configuration and is not compatible with the system. However, you may encounter this annoying error code 2112 on your Linksys router due to several other reasons.

 

So, if you are facing the same error and wondering how to fix it to access your Linksys router as before, then don’t worry. Luckily, there are several fixes that you may try to eradicate this error code on your own. This informative write-up will surely assist you to perform some easy hacks to eliminate the error code in no time.

Prime Causes of the Linksys Error Code 2112

You need to keep in your mind that whenever it comes to technical glitches, it is never just one reason. Hence, if you are struggling with the same issue and get the 2112 error code on your Linksys router then, you must realize that this error code may arise due to several reasons.

 

Well for that, here, we have discussed some of the most prime causes for which this frustrating Linksys error code 2112 pops up while trying to access your Linksys router.

 

  • The Linksys router does not connect to the internet.
  • This issue may arise because of a poor internet connection.
  • You may encounter this annoying error code due to password issues of the Linksys router.  
  • This issue may arise because of the technical issues with the device driver.
  • Issues with the firmware update.
  • You may encounter this annoying error code whenever there are some technical flaws while resetting the Linksys router.
  • A corrupt web browser of the system and IP address or malicious sites can also generate error 2112. There can be a fault in hardware peripherals.
  • This issue may arise due to some internal technical bugs of the Linksys router.

 

Now, you are aware of the prime causes for the Linksys router error code 2112. Therefore, you need to match the above-mentioned points along with your current situation and identify the particular reason behind this error code. Then, you will just need the technical hacks to eliminate this error code from your system.

Fixes to Resolve the Linksys Error Code 2112

Here, in this passage, we are going to explain some of the most useful and easiest hacks by which you can easily troubleshoot this disturbing Linksys router 2112 error code on your own.

 

Hence, it is suggested to follow the fixes carefully and implement them in the correct order to get instant result.

 

Way 1: Reboot the Linksys Router

This is the most fundamental step that you must try to get rid of this annoying error code. Moreover, by rebooting the Linksys router, you can fix several types of technical glitches of the Linksys router.

 

To reboot the Linksys router, you need to follow the below-mentioned easy steps:  

 

  1. At first, open a web browser on your system. You can use any web browser as per your choice and availability (Mozilla Firefox, Google Chrome or any other web browser).
  2. Go to the address bar of the web browser. Now, enter the IP (Internet Protocol) address of the Linksys router in the address bar of the web browser. The IP address of the Linksys router is 192.168.1.1.
  3. After entering the Linksys router’s IP address, tap on the Ok button to continue. Alternatively, you can press down the Enter key on your keyboard to continue.
  4. After that, open the settings of the Linksys router in the navigation panel.
  5. Next, you need to tap on the ‘Troubleshooting’ option under the router settings menu.  
  6. Now, go to the Diagnostic tab. Select the Reboot Link option under the Diagnostic tab.
  7. After that, open the “Important pop-up” box. Hit the “Yes” button to proceed further.
  8. Now, you need to open the router popup box. Tap on the Ok button.    
  9. After completing all the above steps, restart the device.
  10. At last, you need to try to access your Linksys router to check if the error code is resolved or not.

 

After executing these steps, if the issue still continues to appear, then, it is advised to move to the alternative method which is stated in the below passage.

 

Way 2:  Reset the Linksys Router to its Factory Settings

You can also execute a reset process of your Linksys router to its factory settings in order to fix this frequent technical error code 2112. To perform this action, try to follow the instructions stated hereunder:   

Using the Reset Button

If you want to reset your Linksys router to its factory default settings, then you can perform the reset process by utilizing the reset button. To do so, follow the steps below:

 

  1. The foremost thing that you have to do to turn off your Linksys router. Unplug the Linksys router from the wall socket. Now, you need to wait for a minute or while and after that, plug it in back.
  2. Next, you need to find and locate the tiny button titled ‘Reset’. You will get this small button in the rear portion of your Linksys router model.
  3. Press and hold down the Reset button of your Linksys router by using a paper clip. While you are holding down the Reset button of the Linksys router, you will find that the LED power light of the router is blinking.
  4. Now, you need to wait for a few seconds until the LED power light of the Linksys router stops blinking.
  5. After that, you need to make sure that the LED power lights of the router are solid green.  
  6. It means that you have completed the entire reset process of your Linksys router.
  7. After completing all the above steps, turn on your Linksys router. Open a web browser and log in with the new user account name and new password.

 

Using the Web Browser

Alternatively, you can use the web browser to reset your Linksys router to its factory default settings. To do it, go through the following steps:

 

  1. At first, you need to open the default web browser of the system. You can use any web browser as per your choice and availability (Mozilla Firefox, Google Chrome or any other web browser).
  2. Go to the address bar of the web browser. Now, enter the IP (Internet Protocol) address of the Linksys router in the address bar of the web browser. The IP address of the Linksys router is 192.168.1.1.
  3. After entering the Linksys router’s IP address, tap on the Ok button to continue. Alternatively, you can press down the Enter key on your keyboard to continue.
  4. Enter the username and password, in the labeled field. If you did not modify the factory defaults of your Linksys router, then leave the username field blank. Enter the password of the router ‘Admin’.
  5. Tap on the login button.
  6. Next, go to the Administration tab. You may get this tab at the top corner of the Window tab.
  7. Select the Factory Defaults option. You may get this option at the top corner of the screen.
  8. Hit the Restore factory defaults button.
  9. After tapping on the factory defaults, your Linksys router will be reset.
  10. Now, you need to wait until the power LED light of the router becomes solid.
  11. Once the power LED light of the router becomes solid,  it means you have completed the reset process within the system.
  12. After completing all the above steps, try to open any website and verify the internet connection of the device.

Wrapping Up

That’s it! These are the most effective and easy hacks to eliminate the Linksys error 2112. Now, you do not need to worry about the Linksys router 2112 error code anymore. Just try to execute the above steps and procedure to fix it. Moreover, you do not require any extra technical knowledge or ideas to perform the fixes mentioned here. Try to perform the hacks and see which one is giving you the ultimate solution in no time. Further, you can also drop a comment in the below section and share your experience.

01Mar/19

Know How To Perform Belkin N150 Wireless Modem Router Setup Process Within A Flicker Of Time

Modem routers are quite tricky to set up. Therefore, newbies and even some experienced users get confused while performing that task. Now, this setup problem applies to the Belkin n150 wireless modem router also.

Though, many users encounter various types of issue while setting it up for the first time. However, with the help of proper setup information users can avoid those problems and use their router smoothly.

Now, if you are one of those users who is facing problems while performing the Belkin N150 wireless modem router setup process then follow this article. This is because we have provided all the important steps to execute that process here. Now, without wasting any time, let’s have a look at them.

Ways for a Prompt Belkin N150 Wireless Modem Router Setup

During the router setup process, you need to follow simple and straightforward instructions in order to achieve a proper connection. In this section of the article, we have provided those steps for you. Have a look at them and apply them as instructed:

Connect the Required Devices Together

In order to execute the Belkin N150 wireless modem router setup process, the first thing you need to do is connect all the important device together properly. And to do that, follow the given steps:

  1. Plug-in the modem router into an AC power outlet.
  2. Then, connect your system with the modem router with the help of LAN or Ethernet cable. You can use any LAN port of the Belkin N150 wireless modem router to perform this task.
  3. However, if you are using a wireless system like Laptops then you need to use the LAN or Ethernet cable in order to execute the initial router step-up process.

After doing that, check the cables and make sure they are firmly connected with your system and modem router. Once you have done that, move on to the next step area.

Configure the Modem Router Through the Web-Based Setup Page

Now, to configure the modern router you need to launch the Administrative page of the  Belkin N150 wireless modem router and to do that follow the given steps:

  1. Launch your desired web browser application and type the default IP address of the modem router in the address bar and hit the Enter key. Usually the default IP address is 192.168.2.1. But it can vary from router model to model, hence, we will suggest you verify the default IP address of your modem router with the help of Belkin N150 package box or official website.
  2. Now, in the Administrative page, the first thing you will encounter is a Login page. If you are setting up the Belkin N150 wireless modem router for the first time then you need to enter the default Username and Password. You will get them on the back of the router package box or in the provided manual box. However, if you have set up a different password for your Belkin modem router then you need to provide those credentials into their respective place and then hit the Login button or the Enter key.

Inside the Administrative Page

  1. The Administrative page will open up on the screen. There you need to click on the Wizard tap to enter into the Getting Started page and then click on the Next option. Instantly, the Time Zone page will appear on the browser. In that page, set the correct time zone of your region and then hit the Next button.
  2. After that, the network settings page will come up on the browser. There you need to enter the necessary ADSL settings which will be provided by your Internet Service Provider (ISP) and then hit the Next button.
  3. On the next page, you can enter your desired wireless network name in the SSID area and wireless password in the Pre-Shared Key area. But while doing that make sure not to use any special characters such as #, @, or $ in the SSID.

Once you have done, hit the Next and Finish button in order to save the settings changes. But if you have modified any setting of your modem router then click on the Save button to apply the changes.

Test the Internet Connection

Now, the last thing you need to do is to test your Internet Connection and to do that, follow the provided steps:

  1. Use the ADSL cable in order to connect your Belkin N150 wireless modem router to an AC wall outlet and ADSL service.
  2. Then reboot the modem router and open up a browser application to check the status of the internet using a wired and wireless connection.

If everything is working fine, then you are good to go.

In the End

However, if you are facing an internet issue after setting up your modem router then it is quite possible that something is wrong with the setting and you need to rectify it in order to fix that internet issue. Apart from that, the internet issue may get created because of problems on the Internet provided side. In that case, you need to consult with them in order to resolve those issues.

We hope that our steps and suggestions are helpful to you regarding the Belkin N150 wireless modem router setup process. Now, if you need more information on this topic or other tech-related stuff then keep following our upcoming articles.