All posts by Max Howells

11Jun/19

Factory Reset Belkin Router: A Complete Guide

If you have forgotten the password of your Belkin router, then one feasible way to get rid of this situation is to factory reset Belkin router. The steps to reset the Belkin router are very easy to follow and you can learn it from this article. Here, you will get to learn the two different methods to reset the Belkin router and are as follows: a) Hard Reset Belkin Router, and b) Reset Router via Belkin Setup Page.

Benefits of the Factory Resetting Belkin Router:

There are several benefits you can take advantage of the factory reset Belkin router and are as follows:

  • If you forgot the password of the Belkin router, then the hard reset is the only way to solve the problem.
  • Anything wrong with the settings of the router can be resolved by the factory reset Belkin router process.

How to Factory Reset Belkin Router? Avail the Complete Methods

There are two different methods to factory reset Belkin router and are as follows:

  • Hard Reset Belkin Router
  • Reset Router via Belkin Setup Page

To know the complete steps of both of the methods of the Belkin router reset process you need to read the steps of each of the sections as explained below:

Steps to Hard Reset Belkin Router

Hard Reset is the only option, you need to proceed with if you forgot the password of your Belkin router. And the steps to follow to hard reset the Belkin router are as follows:

Step 1: Shut Down Your Computer

First of all, you need to turn off your PC. If you are using an older version of Windows, then tap the Windows key at first, and then click on the “Shut down” option. However, if you are a Windows 10 user, then you need to click on the Power icon from the left-hand side panel, after tapping the Windows button. Next, from the menu window select the “Shut down” option.

Step 2: Turn off the Power Supply

After shutting down your PC, switch off the Power for both the router and the PC, to ensure no current flow via the wires.

Step 3: Disconnect Wires from the Belkin Router

Next, disconnect all the wires from the router, except the Power cable.

And then, switch on the power supply for the router.

Step 4: Locate the Reset Button

Further, locate the reset button of the router. In general, the reset button of the router is placed at the rear portion of the device. A tiny hole with the Reset note near to it is the reset button of the router.

Step 5: Press and Hold the Reset Button

Now, take a thin pin (Paper Clip) to press and hold the reset button. Keep the reset button pressed, until the power indicator shows the red light solid. The solid red light on the power indicator is the symbol that the reset is done successfully.

Step 6: Reconnect the Wires on the Belkin Router

Further, switch off the power for the router.

Next, connect the cables back to the router, to their actual ports, you can now take the help of the guide which comes with the router for the process.

Step 7: Turn on the Power Supply

After you connect the cables correctly, in their proper locations. Now, turn on the power for both the PC and the router. Then, wait until the PC is completely on and the lights on the router become stable.

Step 8: Verify the Success of the Factory Reset Belkin Router

Now, you need to begin to connect with the internet via the Belkin router, as you have done at the beginning when you have bought it.

That is the complete procedure to hard reset the Belkin router. Now, you are eligible to login into your Belkin account using the default username and password for the router.

The default Username for the Belkin router is admin and in the place of the Password, you need to keep the space blank.

Steps to Reset Router via Belkin Setup Page

To reset the Belkin router via the setup wizard, the steps you need to follow, are as explained below. It is advised to read the steps before so that, during following the instructions you will not get stuck in any step.

Step1: Login into Your Belkin Account

To login into your Belkin account, at first, you need to know the IP address of your router. And the steps to follow to know your Belkin router IP address is simple and are as below:

Note: You need to keep the Belkin router connected with the PC via the Ethernet cable to do this task.

Know Your Belkin Router IP Address

Press the Windows and the letter R key simultaneously to open the Run bar window. After that, on the Run bar enter “cmd” without the quotations. Next, hit the Enter key to open the black background Command Prompt window on the screen. Now, on the Command Prompt window, you need to type ipconfig. Then, press the Enter key to get the required information generated on the Command Prompt window.

From the generated information, find the Default Gateway section. The number which you get beside Default Gateway is the IP address of the Belkin router. Note down the IP address of your Belkin router, for further use. 192.168.1.1 is an example of an IP address of the Belkin router. Check your’s, with the help of these above steps, and then proceed further.

Now, open a browser on your PC. After that, at the address bar of the browser, enter the IP address of your Belkin router. Next, hit the Enter button, to navigate to the Belkin login page. Here, you need to fill up the Password of your Belkin account. If you have not changed the details, then you need to keep the Password space blank. Then, click on the Submit button, to login into your Belkin account.

Step 2: Utilities (Restore Factory Defaults)> Restore Defaults> OK> OK

After you login into your Belkin account, the next step is, to click on the “Restore Factory Details” option from the left-hand side panel, that is present below the “Utilities” section. Then, from the next window, click on the “Restore Defaults” button. After that, select OK of the “Message from webpage” window. Again click on OK, to confirm. By following all these steps, on the window, you will see the “Applying changes, Please wait…” message on the screen. Now, wait, until the countdown is over and the Belkin window gets open. That is the overall process to factory reset Belkin router.

To learn the factory reset Belkin router steps in a simple manner, this article will be your perfect choice. Hopefully, after going through this article, you will get the success in resetting your Belkin router efficiently.

11Jun/19

All About Cisco Router Port Forwarding Methods

Port forwarding helps us to launch the ports with inbound traffic for some particular services. As an example, we can tell you that, if you are hosting any of the web servers with your LAN port, then you will be able to set up a port forwarding. This can, in addition, can help you to control the HTTP traffic.

Port forwarding is a service by which any of the gateway or other related devices can convey all of the incoming information/ traffic to an appropriate port in a private network node. If you want to use the port forwarding service in your Cisco router. And if you are looking for the methods that can help you to configure port forwarding on the Cisco Router. Then, let’s have a look at our article. Here we are going to discuss the steps of Cisco router port forwarding procedure.

How to Configure Port Forwarding on Cisco Router in Easy Steps?

If you are looking for the answer on “how to configure port forwarding on Cisco router?” Then, here we are going to provide you with what you want.

In this part of the article, we are going to discuss the steps that can help you to learn the procedure of configuring port forward on the Cisco Router. Hence, go through the steps that you come across in the upcoming part of the article to know the details on it.

If you want to forward the port/ports to some other network, then, you must need to go through two different stages.

First, your device needs to obtain a static IP address. Then, you have to configure the port forwarding feature in your Cisco router. The steps which follow, will help you to do so.

Step 1: Get a Static IP Address?

To configure the port forwarding feature in your Cisco router, you first need to assign a static IP address in your device. And for this, keep following:

  1. At first, go to the lower left side on your computer screen and click on the Start button. Then, click on the Search bar and write down cmd. Then, hit the Enter button from your keyboard.
  2. After that, write down ipconfig /all in the appearing Window and hit the Enter button.
  3. Then, note down the subsequent digits that are registered under the network connection. Which are followed by
    IPv4 Address (or IP Address)
    Subnet Mask
    Default Gateway
    DNS Servers
  4. Now, launch the Control Panel and click on the Network and Internet option. Then, select the Network and Sharing Center, that you can find it on the left-hand side of your computer screen.
  5. Thereafter, click on the Change adapter settings option and right click on the Local Area Connection. Then, select the Properties option.
  6. Then, a list will appear on your screen and choose the Internet Protocol Version. Thereafter, again choose the Properties button.
  7. After that, click on the “Use the following IP address” option. Then, add the binary number 10 in the latest figure of the Default Gateway number, and then put it in the IP address field.
  8. Furthermore, you will need to proceed with the next step by entering the numbers of the Subnet Mask, Default Gateway, and DNS Servers. And select the OK button. Then, proceed with the next steps.

Step 2: Procedure to Configure Port Forwarding on Cisco Router

Once you are done with the step which is mentioned before, now you will be able to configure port forwarding on your Cisco router. Hence, to do this, take a glance down the steps:

  1. At first, you will need to open your preferred web browser on your computer. Then, write down the Default Gateway number in the address bar and hit the Enter button from your keyboard.
  2. Then, you will need to enter your providing username and password. This will help you to access the router’s interface.
  3. Thereafter, find out “Applications and Gaming,” “Advanced,” “Port Forwarding/ Port Triggering,” “NAT/ QoS,” or the tabs that are similar like these options.
  4. After that, you will need to access the gate that you want to launch under Internal and External. Otherwise, you can enter the range of ports that you want to launch following Start and End.
  5. Now, select the Protocol which is TCP, UDP, or you can select both of them.
  6. Furthermore, you will need to proceed with the next step by entering the static IP address that you have made before.
  7. Then, verify if it is Enabled or not. And go to the Application section and enter a name as per your choice. Thereafter, click on the Save button to save the changes that you have made.
  8. Now, you are done with port forwarding successfully.

Summing it Up

Through this article, we have provided you the method that can help you to configure Cisco router port forwarding. Follow the steps that we have mentioned through our guidance and forward your port successfully. If you have any more questions regarding this topic, then you can comment us on our comment section.

11Jun/19

Fix The Cisco Router Not Working With Effective Guidelines

Cisco is one of the best companies present in the market that makes a variety of networking devices like routers, modem, etc. All the routers from this company have a plethora of different features and services. Despite the fact that Cisco routers have many distinct features, even then you face a variety of problems over time. One common issue that you often get is the “Cisco router not working”.

Basically, you face this issue when there is no internet connectivity from the ISP. There are many reasons for the occurrence of this issue. If there is a blockage in the wireless connectivity of the router, then you can face this problem.

Even, when the frequency of the WiFi network is not correctly set, then also there is a possibility for you to encounter this glitch. Moreover, if the WiFi Driver is not up to date, this error occurs.

Useful Method to Resolve the Cisco Router Problems

In this article, we will provide some efficient and effective solutions which will help you to remove the “Cisco router not working” issue.

Restart the Router

The primary solution to resolve this problem is to restart both the router and the connected device. Here is the process on how to do it:

  • First, turn off the power of both the router and the PC. Then, remove the power cable of both these devices from the wall socket.
  • Also, unplug ‘Ethernet’ cables from the back of both these devices and then wait for thirty seconds.
  • After that, put back the ‘Ethernet’ cables to their actual places.
  • Finally, turn on the router and the PC both.

Alter the WiFi Frequency of the Router

Sometimes, you can get this “Cisco router not working” issue, if the frequency of the wireless network is not set correctly. Thus, the best solution is to change the WiFi frequency that the router can accept. Here are the steps –

  • First, launch a web browser. Then, on the URL bar, type “192.168.1.1” and press the ‘Enter’ key.
  • This will open the router login page. Leave the ‘Username’ field blank, and on the ‘Password’ field, type ‘admin’. Next, tap the ‘OK’ button.
  • Now, the router configuration page will open up. Within that page, go to the left panel and then choose the ‘Wireless’ option. This action will open the ‘Wireless Settings’ page.
  • Now, under this section, locate ‘Channel’. Then, from the drop-down menu, select either the ‘2.4GHz’ or ‘5GHz’ according to the user traffic.
  • Next, tap on the ‘Save’ button and then exit from the router settings page.
  • Lastly, see if the router is working properly or not.

Remove any Obstruction that Blocks the WiFi Signal

You can face the “Cisco router WiFi not working” problem if some kind of obstruction like wall or floor blocks the signal. In that case, here’s what you should do –

  • First, keep the router at the center of your house so that you can get a good wireless signal.
  • Also, make sure that there are no blockages which cover the router.
  • Do not keep the router close to the wall or ceiling. Keep a distance of two feet and see if the connection improves or not.
  • If there are any devices like television, cordless phone, microwave that are near the router, then remove them.

Activate the WLAN AutoConfig Service

When the WLAN AutoConfig service is obsolete, then you face this problem. The service WLAN AutoConfig is used to configure the connectivity settings and wireless security. To activate this service, follow these steps:

  • First, hit the combination of ‘Windows + R’ keys to open the’Run’ dialog box.
  • Within that dialog box, type “services.msc” and tap on the ‘OK’ button.
  • At this moment, you will get a new ‘Services’ window in it. There will be services for all the programs installed within the computer in a list.
  • Next, from that list, locate and select the ‘WLAN AutoConfig’ service. After that, right-click on the service and then from the popup menu, choose the option ‘Properties’.
  • This will open a new window with the name ‘WLAN AutoConfig Properties (Local Computer). Inside that window, select the ‘General’ tab. Under that tab, go to the section ‘Startup type:’. From the drop-down menu, select the ‘Automatic’ option.
  • Next, at the bottom of this window, tap on ‘Apply’ and then ‘OK’ to confirm any changes to the computer.

WiFi Service Activation Process

When the Windows Operating System deactivates the WiFi service, then for that cause, you can get the “Cisco router not working”. Here are the steps to activate WiFi Service:

  • First, find and then choose the ‘Network’ icon from the lower right side of the taskbar. Then, right-click on it and then choose ‘Open Network and Sharing Center’ from the popup menu that comes up.
  • When the ‘Network and Sharing Center’ window shows up, go to the left panel.
  • After that, from the left pane, choose the ‘change adapter settings’ link. This will launch ‘Network Connections’.
  • On that page, locate the wireless network to which you are currently connected. Then, right-click on the chosen network and select the ‘Enable’ option. If the network is active already, then ‘Disable’ it. Then, ‘Enable’ it again.
  • After the WiFi Service is active, reboot the computer and see if the Cisco router works or not.

Update the Wireless Network Driver

If the Wireless Network Driver is not up to date, then there is a high probability for you to encounter this problem. Now, the feasible solution to rectify this issue is to update the WiFi Driver. In order to do it, follow the simple steps provided beneath.

  1. First, right-click on the ‘Windows logo’ to open the ‘Option Menu’. After that, select the ‘Device Manager’ option from the menu.
  2. Now, inside this window, you will get all the devices and their respective drivers within a list.
  3. From that list, locate and choose “Network Adapters”. After that, tap on the ‘arrow’ icon on the front of the device category to reveal an expanded sub-list. This list contains the driver ‘Network Adapters’.
  4. From the expanded sub-list, choose the initial driver and then right-click on it. Then, from the popup menu, choose the ‘Update driver’ option.
  5. At this moment, a new window will appear with two links. Choose ‘Search automatically for updated driver software’.
  6. Now, if there is any kind of updates present, then that will be downloaded and installed automatically. This procedure can take some time to complete. So, wait patiently.
  7. Then, simply reboot the machine.
  8. Finally, after the computer boots up, examine if you are still facing this issue or not.

Epilogue

With this article, it will be pretty easy to eradicate the “Cisco router not working” error. But, even after following every method, if you are unable to mitigate this issue, then no need to worry. Just contact a professional to fix the issue.

11Jun/19

An Ultimate Guide To Resolve Linksys Error 211

Linksys is one of the most trusted and recognized brands who deliver premium quality router devices. However, despite being so popular, it is bound to develop some sort errors. Hence, one of the most common error encountered by the users is Linksys error 211. If in case you are in search for some effective hacks to resolve this Linksys error code, then this article is for you.

Therefore, in this article, we are going to discuss some of the methods that you can follow in order to fix the Linksys error code occurring on your router. But before you should be aware of the essential reasons that can lead you to this error. Hence, without wasting any more time, let’s move to the next part of the article.

Fundamental causes of this Linksys error 211:

In this section of the article, we are providing some of the effective causes of this Linksys router error code, as a result, you will be able to resolve the issue in an efficient manner. Hence, now you can have a look at the causes listed below:

  1. If there is an issue with the ISP or the internet connection of yours, then you might encounter this error.
  2. Using an outdated firmware of the Linksys router can also be a reason for this error.
  3. Also if the network drivers of the Linksys router are out of date then also you might encounter the error.
  4. Another case is if the Linksys account is corrupt.
  5. Due to the virus or malware attack, if the Linksys router has become corrupt.
  6. Also if the Linksys router settings are not compatible with the system, then also you can receive this Linksys router error code easily.
  7. Lastly, if you have not given a restart to the Linksys router, then also it can cause the issue.
  8. Moreover, using a Linksys router full of dirt and dust can result in Linksys error 211.

Now, once you are aware of the reasons that are triggering this error code then, let’s continue with the solution part described underneath.

Troubleshooting methods to Fix Linksys wireless adapter error 211

In case you are not aware of how to fix error code 211 on your Linksys router, then do not panic. Try out the effective methods to resolve the Linksys router issue on your own. Performing all the steps of the method without missing any step ensures a positive result for resolving the issue.

Method 1: Create a New Linksys Smart Account

If you already have a Linksys Smart account, then delete it. The account might be hacked or corrupt when this Linksys error code occurs. Hence, after deleting the Linksys Smart Account, you have to create a new one. However, if you want to learn the steps of the process, then we can teach you. Therefore, you can have a look at the steps that we provided as follows:

  • In the first step, you have to login into your Linksys router home page. Therefore, you have to first open any web browser on your system.
  • Once the web browser opens, you have to enter the default Linksys router Internet Protocol (IP) address in the address bar. This default Linksys router Internet Protocol (IP) address is already printed at the back side of the Linksys router.
  • After entering the default Linksys router Internet Protocol (IP) address in the address bar, you have to hit the Enter key from the system’s keyboard.
  • Once the Linksys router login page opens, you have to enter the username and password.
  • As the Linksys router home page opens, click on the Linksys Smart Wi-Fi account button. This button will be available at the top right corner of the Linksys router home page.

Steps of Method 1 Continued

  • In the next step, you have to fill up all the blank fields according to the options provided there.
  • After doing all this, accept the End User License Agreement by clicking on the Agree button at the bottom of the window.
  • Now you have to wait for the Linksys Smart Wi-Fi Account to be created and when it is done, you will receive be a successful message.
  • Once the Linksys Smart Account is created you can check if you still encounter the Linksys error 211.

Therefore, these are the steps that you can follow in order to get the Linksys router error code resolved. If in case, the Linksys router error code still pops up, then don’t worry. You can also perform other fixing methods given the next part of the article below.

Method 2: Delete or Remove the Third-party Antivirus Software

If any third-party antivirus software is blocking its services, then also you might encounter this error. Hence, you have to remove or delete that third-party antivirus right away. In order to perform the process do the following:

  • At first, you have to open the Start menu by clicking on the Windows logo at the left corner of the taskbar.
  • When the Start menu opens, type Control Panel in the search bar. After that, click on the Control Panel option from the list of results.
  • When the Control Panel window opens, you have to navigate to the Programs and Features option.
  • As the Programs and Features window opens, you have to locate and right-click on the third-party antivirus software.
  • From the popup list of options, you have to click on the Uninstall option. After that, you have to follow all the on-screen instructions in order to complete the Uninstallation process.
  • Once all the processes are done, you can check if the Linksys error 211 occurs or not.

Hopefully, now you will able to fix the Linksys router issue easily. However, if in case you want to know other fixing methods then you can have a look at the next part of the article below.

Method 3: Try to Update the Network Drivers of your System

If the network drivers of your system are out of date then you might encounter some internet connection issues. And the internet connection issues can easily lead to the Linksys router error code. Hence, updating the network drivers to its latest version can easily help you to resolve the error. Therefore, the steps of the update process are discussed as follows:

  • In the first step, open the Device Manager window through the Start menu. Inside the Start menu, type Device Manager in the search bar.
  • Then, click on the Device Manager option from the list of results.
  • As the Device Manager window opens, locate the network driver of your system.
  • On finding it, you have to right-click on it. After that, click on the Update driver software option from the popup list of options.
  • As the network driver update window opens, click on the first option. The first option will be Search automatically for updated driver software.
  • After selecting the first option of the window, wait for the update process to finish its task.
  • Once the process finishes, restart your system and the Linksys router.
  • As the system and the Linksys router restarts, check if the Linksys error 211 is still there or not.

Therefore, these are steps in order to update the network drivers to its latest version. Hence, this process will help you resolve the Linksys router issue easily. However, for more fixing methods, you can follow the method.

Method 4: Reset the Linksys router

If none of the above methods is working out to resolve the Linksys router error code, then you can try out this last method. Here, you will get to see the steps that you can follow in order to reset the Linksys router. Hence, you can move to the below part in order to get hold of the steps of the process:

  • First of all, turn off all the Linksys router by pressing the Power button. After that, disconnect the Linksys router from the system.
  • Also, disconnect the Linksys router form the modem. Now, wait for about 5 to 10 minutes and then turn on the Linksys router.
  • With the help of the paper clip, press and hold the Reset button. As the Linksys router is reset to its default settings, you have to connect the router to the system.
  • After that, you have to set up your Linksys router and then check that if the Linksys error 211 still troubling you or not.

Now we hope that you are able to resolve the Linksys router problem on your own.

Conclusion

In order to end this article, we would like to say that these are ultimate methods in order to resolve the Linksys error 211. Hence, you will not face any issue while you try out the steps of the method. If in case you want to know more such methods then you can get back to us.

08Jun/19

Smart Hacks To Troubleshoot Linksys Router Keeps Dropping Internet Connection Problem

Sometimes while using the Linksys router, you might witness a huge drop in wireless connection. There are some of the obvious reasons due to which Linksys router sometimes gets disconnected. It might also lead to a wireless connection issue. However, there are certain underlying reasons behind this, it can be associated with the MTU Size. In addition to this, it can be a problem of frequency of interference which you can get from other wireless devices. Also, due to inferior signal strength, you may encounter this issue from your wireless Linksys router.

As the problem lies inside the Router’s firmware and requires an immediate process of upgrade, so below are the steps that you can follow to minimize the Linksys router keeps dropping internet connection.

Prominent Ways to Fix Linksys ea7500 Keeps Dropping Internet Connection Error:

Go through this section and implement the methods as instructed to fix Linksys ea7500 keeps dropping internet connection error instantly.

Fix 1: Handling the MTU size

The Maximum Transmission Unit basically implies the greatest packet size which allows the purpose of internet transmission. Finding a genuine MTU size is imperative in order to receive the most effective throughout intended for the networking task.

Fix 2: Minimize the Interference of Wireless Routers

If the users get through incessant disconnection problem, then carrying out a proper check is a must. You need to examine the below matters for disrupting the signals having a wireless connection. The router can be operational on the basis of the same frequency just like the cordless telephone system or similar such devices. Therefore, one must modify the channel of the router and set that to 1 or 11. This is because these are considered as non-overlapping channels and will prevent certain interference problems.  After changing the respective channel, you have the option to restart the wireless computers.

  • Physical Hindrance

The router or wireless computers often gets disconnected owing to the physical obstacles like walls and floors. In this case, you need to move the computers to another location in order to get a better signal.  The perfect location is the central area of your residence.

  • Place the Router Properly

It is always recommended to place the router above the ground level up to the permissible limit. While you place the router in the top location, you need to ensure that you have maintained an adequate distance of nearly 2 feet between the antenna of the router, ceiling and the wall.  If the signal transmits through multiple floors, then you should keep the router on the peak of the floor and high up in the room. While you are using a wireless device, you need to ignore the vicinity zone that is within 18 inches from the router. This is mainly built in order to ensure safety since this 18-inch radius around the router. This area is regarded as a dead zone having a wireless connection. Therefore, you need to be aware of the fact.

  • Place It in Proper Surroundings

Place your router device keeping a proper distance from large metal objects. Also, you need to keep the router away from the areas having a large concentration of water to ensure proper safety.

      .   Customization of the Wireless Settings of the Router

           If there are default wireless settings on the Linksys router, it might cause major strife along with other Linksys routers to present within the particular network coverage. Therefore, we suggest you modify the wireless network name (SSID) of the router. Also, you have the provision to activate its wireless security completely.

Fix 3: Update the Router’s Firmware

If the wireless connection gets disrupted after performing all the above steps throughly, then we suggest you upgrade the firmware of the router immediately.

Fix 4: Connect the Wireless Devices

After following all the above configurations for fixing the Linksys router keeps dropping internet connection issue, if you find that the issue still exists, then reconnect the devices to the parent network.

Summing Up

This article covers all the major fixes pertaining to the Linksys router keeps dropping internet connections effectively. If you go through the above-mentioned steps strictly, you can easily get away from this frustrating issue. Moreover, you can refer to the user guide to have a quick glance. Apart from this, if you have any innovative idea to fix the above-mentioned issue, then provide that in the section below.

08Jun/19

Learn How to Reset Linksys Router Password and Experience Hassle-Free Service

Linksys router comes with well-encrypted password combination. But utter nuisance takes place if you can’t remember the password of the router while configuring the device. One of the major problems that Linksys router users face is when they are unable to reset the router back to the factory defaults. You need to perform certain steps if you are unable to recollect the username and password. This article will give you a list of effective ways that you can follow to know how to reset the Linksys router password. Moreover, we have mentioned some of the handy tips to get rid of this issue in no time.

Effective Ways to Reset Linksys Router Password:

Go through the below-mentioned steps to know how to reset the Linksys router password.

Modify Linksys Login Username and Password

  1. First, you need to log in to your Linksys router. This is easy to perform with the help of the web interface. It allows you to talk to your router.
  2. You just need to type the following in a browser address bar:

       http://192.168.1.1.

  1. If you use the Linksys default username and the Linksys default password, then you have the field marked as Username blank.
  2. Then, type “admin” into the field name marked as Password.
  3. After you gain access to the interface, navigate to the Administration tab
  4. Thereafter, move to the “Management” subpage. There you will find the username as well as the password you are currently using.
  5. Finally, you have to change both entries. It becomes easier for you to recollect but others will face problem figuring it out.
  6. After finishing this, hit the button termed as Save Settings.

Restore Default Settings

In order to restore your router to its original settings, you need to find out the Reset button present on the router. It is present in a small hole to evade accidental resets. In order to press it, you can use a paperclip, pen, or any kind of sharp-pointed object. You can find this button on different places based on the model of the router that you are using. There are certain routers where the Reset button is present at the back. While in others, you will find that at the bottom

  1. You just need to insert the paper clip.
  2. After that, press and hold the button for some time. As you hold the Reset button, you will find a light that blinks time and again.
  3. After that, leave the Reset button and detach the router from the wall.
  4. Now, wait for sometime before you plug it back.

Tips

However, now you can easily access the interface of the router using Wi-Fi. Rather, you should connect it through an Ethernet connection to make it more secure. Moreover, you can resort to certain tasks such as Factory Reset by using the web interface. Finally, you just have to find out Factory Defaults present under the section Administration tab. Just click on it in order to revamp the factory settings.

Wrapping Up

We have outlined the major ways to reset the Linksys router password. If you follow the above steps throughly, you can easily get to know exactly how can you deal with how to reset the Linksys router password. All the fixes have been provided by keeping in mind the possible causes. Moreover, you can check the user guide to have a quick glance. Apart from this, if you have any new idea spinning around your head, provide that in the comment section.

08Jun/19

Resolve Linksys Error 2118 With Proven Methods

Linksys error 2118 is one of the commonly encountered error code that users face quite often. This particular error code occurs with your device when you are trying to configure a Linksys router after purchasing it. If you go through the entire article you will find that there are several reasons behind this error to occur.

No matter whatever the reason is, the problem should be fixed at the earliest. So, if you are also one of the same who are encountering this error, then this article is the right place for you to get rid of the error. Hence, have a thorough look at the rest of the article.

Why Linksys Error 2118 Occur?

There are various reasons that are responsible for the Linksys error 2118. To know, have a deep look at the points mentioned hereunder.

  • Unstable or poor internet
  • If the routers are not configured properly.
  • Outdated firmware.
  • Outdated WLAN Card Driver.
  • Virus or malware attack.

Reliable Solutions to Fix Linksys Error 2118- Stepwise Instructions

If you are facing the same error code with your Linksys device, then follow the methods that are described below. User can also fix the error by resetting the router to its factory defaults.

Solution 1: Check the IPV6 Settings

This is the basic method to fix Linksys error 2118. Thus, go through these steps:

  • The first thing you have to do is to navigate to the “Linksys cloud Account”.
  • Then, move to the “Router Settings” option when the Linksys Cloud account tab will launch on the screen.
  • After that, select “Connectivity” from the Router Settings section.
  • Then, navigate to the “Internet Settings” icon. You can find this option in the Connectivity tab.
  • Now, move to choose the IPV6 and tap on the Disable icon as well.
  • After completing all the steps, you have to reboot your device for the first time and let your device to turn on automatically.
  • Finally, check if you are still getting the same error code or not.

Solution 2: Disable the Antivirus Software

By any case, if your device is attacked by malware or virus, then you may encounter Linksys EA6500 unexpected error 2118 as well. For this reason, antivirus conflicts with some software, as a result, it stops working. On that occasion, you have to disable that software and resolve the issue.  First of all, click on the icon “Settings”. You can find this under the option “Start” menu. After that, choose the “Update & Security” option. Then, navigate to the “Windows Security”. This icon located on the left side of the display of the device and tap on “Open Windows Defender Security Center.” Then, click on that option and open the Windows Defender’s Settings. After that have a click on “Virus & Threat Protection Settings.” Now, tap on the three options that are “Real-Time Protection,” “Cloud-Delivered Protection” and “Automatic Sample Submission” to turn off the Windows Defender. Finally, restart your device and check if you are still confronting the same error code or not.

Solution 3: Change your Router Encryption from WPA2 Personal to WPA- PSK

If the above method is not helpful for you then, this is the ultimate methods in order to fix the issue. Therefore, implement as instructed below:

  • At the first step, launch the Web browser and navigate to the Linksys official page.
  • Now, open the Login page as well.
  • After that, you have to give the username and password in the Login page.
  • Now, click on the Wireless option and then, move to choose the Wireless Security icon.
  • Then, move to the Security Model menu and select a security mode as well.
  • Pick WPA/WPA2/Mixed and change the settings from there.
  • After that, you have to open the WiFi on your device and verify if the same error code still annoying you or not.

Ending Note

Here, we discussed the three most effective methods that will help you to get rid of Linksys unexpected error 2118. You can try one of these solutions one by one until the error code gets completely solved. Expectedly,  implementing the above steps will be beneficial for you. But somehow, if any confusion arises on your mind then you can write to us. Moreover, you can also take an expert’s guidance as well.

08Jun/19

A Complete Guide On The Linksys Firmware Update Procedure

Linksys firmware update is an important task that you need to perform if you want to use the internet connection smoothly via your Linksys router. However, the steps to update the Linksys router firmware is not known to many users and even some are confused regarding the exact procedure. Therefore, in this article, you can clarify the complete steps to update the Linksys router firmware. So, read this article sincerely.

Firmware updates will benefit you as it increases system security. Apart from this, many issues of the Linksys router also get resolved by updating the router firmware. Overall, by updating the firmware, you can also enhance the functionality and stability of the Linksys router. Now, without further delay, let’s move to the next part of the article.

Know How to Update Router Firmware Linksys?

The steps for the Linksys firmware update are very easy to learn and you can get success by a complete study of these below sections. So, check them out sincerely without skipping any of them.

Step 1: Note Down the Linksys Router Information

To begin the Linksys firmware update process, at first, you need to note down the following information mentioned below. This information is present on the sticker that is attached to the router’s body. Generally, the information contained sticker is attached at the lower portion of the router.

  • Model No.
  • The version of the Linksys router

After knowing all these above-said information, continue with the below steps to update the firmware of the Linksys router.

Step 2: Download Linksys Router Firmware Update

First of all, navigate to the Linksys router firmware download page. For that, you need to open a browser on your PC after connecting to the internet service. Then, click on the “Support” link which is present at the upper portion of the window, that is the third option beside the Linksys logo. On the Welcome To Support window, you need to fill the “Search by Product Name or Model Number” bar with the appropriate information which you have got from the information sticker, that is attached to the Linksys body. After you have entered the product’s name or model number of the router on the bar, you will get your router’s option on the list, click on that.

Further, from the next page click on the “DOWNLOADS/FIRMWARE” button. After that, select the “Hardware version” link which you have noted down earlier. On the information sticker of the router, the hardware version name is labeled as version, ver. or V. In case, if you found nothing, then you need to proceed with by clicking on the “Hardware version 1.0” option.

After you click on the Hardware version option, you will see that the section gets expanded. From the expanded list, click on the Download link which is present under the Firmware section of the window. Then, click on the “AGREE” button, to accept the terms and conditions which are written on the window. After you click on AGREE, the Linksys firmware update file will get in progress. Wait until the update firmware gets downloaded completely. It will hardly take a minute to get downloaded. Next, continue with the further steps to install the updated firmware of the Linksys router.

Step 3: Know the Linksys Router IP Address

If you have already aware of the IP of the router that you are using, then you can skip this step. Else continue with the below lines.

For Windows Users

Listed below are the steps to follow to know the IP address of your Linksys router.

  1. Press both the Windows and the letter R button at a time to open up the Run bar window.
  2. Then, on the Run bar, type cmd.
  3. Next, click on OK/ hit the Enter button to get the black background Command Prompt window open.
  4. After that, on the Command Prompt window, enter “ipconfig” without using the quotations.
  5. And lastly, press down the Enter button to execute the ipconfig command.
  6. Now, from the generated results on the Command Prompt, navigate to the “Default Gateway” section. The number which you see beside the Default Gateway is the IP address of the router. Note down the IP address of the router for further steps.

For Mac Users

If you are a Mac user, then the steps that you need to follow to identify the IP address of the Linksys router are stated below.

  1. At first, click on the Apple logo present at the top left-hand portion on the screen.
  2. Then, from the Menu window, select the “System Preferences” option.
  3. Next, under the Network menu, click on “Internet and Wireless”.
  4. After that, click on the Advanced button from the “Internet and Wireless” window.
  5. Further, open the TCP/IP tab. Here, you will locate the Default Gateway option. The number beside to the Default Gateway is the IP of the Linksys router. Remember or write the IP address on a note for further steps.

Step 4: Login to Your Linksys Account

Now, open a browser on your PC, wait until the browser window is loaded completely. Then, at the address bar of the browser, enter the IP address of the Linksys router that you have noted earlier. “192.168.1.1” is an example of the IP address. After entering the IP address on the Address bar of the router, press down the Enter button. This will navigate you to the login page of the Linksys router.

Further, on the login page of the Linksys router, you will get two different sections to fill and these are as follows: Username and Password. If you have not changed the username and password earlier, then you need to enter the default details on the fields, and these are as follows:

  • Username: admin
  • Password: password

However, if you ever changed the details, then you need to use those details only to log in into your Linksys account successfully. In case, if you have forgotten the password, then you need to hard reset the Linksys router. To know more details about the hard reset process of the Linksys router, you need to read the last section of this article.

After entering the correct Username and Password on the fields, click on the “Login” button, to log in into your Linksys account.

Additional Step: Create a Backup of the Router Settings

For the safety purpose, you can proceed with these below steps.

  1. From your Linksys account, click on the “Administration” tab.
  2. Next, select “Configuration Management”.
  3. Further, from the Configuration Management menu window, click on the “Back UP” option.
  4. Next, choose a location to save the “Config.bin” file, and then click on “Save” to meet the purpose.

Now, follow the further steps to complete the Linksys firmware update process.

Step 5: Administration> Firmware Upgrade> Browse> Upgrade

Finally, now you have arrived at the finishing step to upgrade your Linksys router firmware. So, check the steps below.

Go to the “Administrator” tab, from your Linksys account window.

Next, select the “Firmware Upgrade” option.

Further, click on the “Browse” button on the pop-up window and then navigate to the file which you have just downloaded that is the updated Linksys router firmware. After you select the file, click on the “Upgrade” option to complete the process. Now, you will see that the upgrading process is in progress, wait until it gets completed. Once, the Linksys Firmware Update process gets over, it is advised to restart your PC before using to get the better system performance.

Hard Reset Linksys Router

This is one of the most widely used methods which works to fix the forgot password issue of the Linksys router. So, try these below steps if you are stuck with the same problem. Hard reset will cancel all the pre-settings that you have made on your router and revert back to the default settings.

  1. At first, press down the Windows button to open the required options.
  2. If you are the user of the older version of Windows, then click on the “Shut down” button to complete the task. Whereas, if you are a Windows 10 user, then you need to click on the Power icon at first after tapping down the Windows key. Next, from the menu window, select the Shutdown option to turn your system off.
  3. After that, switch off the Power supply for both the devices.
  4. Next, take out the cables from the power outlet to ensure no presence of current flow via wires.
  5. Further, take out all the cables from the Linksys router except the power cable.
  6. Then, connect the Power cable to the power outlet.
  7. After that, switch on the Power.
  8. Next, locate the tiny hole on the router, where Reset is labeled.
  9. Further, search for a pin (Paper Clip for example) which can be inserted into the Reset hole.
  10. Now, with the help of the pin, press and hold the reset button of the router. You should not release the Reset button until the power indicator becomes solid red. The solid red light of the power indicator is the confirmation symbol that the router gets reset successfully.

After resetting the Linksys router, you can log in to your Linksys account via the default username and password as explained above.

All these are the complete information regarding the process of the Linksys firmware update. Hopefully, if you have read this article thoroughly you will not be facing any problem during following the steps of the Linksys router firmware update.

18May/19

Amazing Tips And Tricks To Reset Linksys Router

Linksys is a well-known brand in the world of routers. And the routers that are developed by Linksys is one of the most preferred ones throughout the globe due to its exceptional features and smooth wireless connectivity. However, at times, the users of the Linksys router often face difficulties while resetting their Linksys router. If you are also in the same list and is tired by searching how to reset Linksys router in a proper way, then you just arrive on the right page.

Here in this guide, we are going to present some easy hacks which will certainly help you to reset your Linksys router without further hassle. Hence, you are advised to have a glance at the article given below. So, let’s start.

How to Reset Linksys Router? Easy Hacks

There are several ways to reset the Linksys router. Let’s have a look at the procedures provided below:

Procedure 1: Using the Reset Button

You can reset your Linksys router easily by using the Reset button. To do that, you should perform the steps as follows:

  1. First, turn the computer off.
  2. Then, disconnect the router from the power supply.
  3. Now, you have to wait for a minimum of 2-3 minutes and plug it back.
  4. Find the Reset button on the back side of the router.
  5. Press the Reset button and hold it until the Power light Started to blink. Here you can also use a paper clip to press the Reset button.
  6. After a few seconds, you will see that the Power light become stable.
  7. Now, you should turn on the computer.
  8. Launch your default web browser to check for the internet connection. If you see that the internet connection is still missing, restart the system and try again.

Procedure 2: Using the Web-page Setup Page

You can also reset Linksys router by going to the web-page setup page. To perform this, you should follow the steps given below:

  1. Launch your default browser and type ‘http://192.168.1.1’ in the address bar. Hit the Enter key to navigate to the next page.  
  2. Enter the username and password in the particular box.
  3. Tap on the ‘Log In’ option.
  4. Navigate to the Administration tab.
  5. Choose the ‘Factory Defaults’ from the list.
  6. Tap on the ‘Restore Factory Defaults’ option.
  7. Now, you have to wait until Power light stops to blink.  
  8. Try to browser a Website to check for the Internet connection.

Now, you have reset your Linksys router successfully.

Final Recommendation

In the above guide, we have discussed some of the easiest tricks to reset the Linksys router. We hope if you perform the above steps in their respective order, then it will definitely help you to ease up your pain. After successfully implementing the above procedures if you face any other troubles, then you need to connect with a tech expert to get rid of this issue at a short span of time. In addition, you can also share your valuable feedback and queries through the comment section given at the end of this post.

18May/19

Confronting Netgear Authentication Problem? Get Ultimate Steps To Resolve It

Keeping the Wi-Fi connection on the Netgear router protected is essential for the integrity of the system and the information saved on it. Hence, it’s better to configure the Netgear router correctly so that the broadcast signal is encrypted. When encryption is enabled, then only those users can authenticate with the router who has the proper login credentials. Therefore, set the Netgear router to broadcast authentication by generating an encryption code using the Web-based interface. This authentication process is not free from random flaws. Netgear authentication problem is a common problem faced by several users while trying to connect devices like smartphones, laptops even after providing the proper login credentials.

Therefore, if you also face the same issue, then nothing to get worried about this. Here in this article, we are going to provide some of the possible ways which can help you to fix the authentication problems of your Netgear router. Hence, you are advised to go through the article given below. So, let’s start.

Know the Root Causes of Netgear Authentication Problem:

Before implementing the solutions, it is essential to know the probable causes behind the problem. It also becomes easy to fix an issue when you know the specific reason behind its occurrence. So, let’s have a look at the points mentioned below:

  • This problem can happen when there is a problem with the configuration settings of the router.
  • You can also face the Netgear router authentication problem if the login credentials you have provided does not suit with the original ones.
  • If the router’s firmware is out-of-date, then it also might be the reason behind this issue.  
  • If there is any problem with the hardware of the router, then you can also encounter this error.

Now, you are aware of the probable causes behind this problem. Hence, you just need some hacks to fix the Netgear authentication problem.

Easy Tips and Tricks to Fix the Netgear Router Authentication Problem

There are a lot of ways to fix this Netgear authentication problem. Hence, you need to have a glance at the troubleshooting hacks explained below:

Procedure 1: Update the Firmware of the Netgear Router

You might face the Netgear authentication problem if you do not update the firmware of the router since a while. Thus, it is better to fix this problem by updating the firmware of your Netgear router. Here are the steps what you have to do:

  1. At first, launch your default web browser. Then, you need to go to the official website of Netgear.
  2. Now, move the cursor to the search field and type the model number of your Netgear router to fix it with ‘firmware.’
  3. On the next window, scroll down the list of the firmware and find the specific one for your device. You will now easily find it using the model number of your router.  
  4. Next, you should download the latest firmware for your router device. When the downloading process completes, install it by following the on-screen guidance.

Once the installation process finishes, you need to restart the router to inspect whether the issue is still in the same position or not. If the issue persists, then you should move on to further methods.

Procedure 2: Reset the Wi-Fi Connection

According to some users, they have fixed the Netgear router authentication problem by resetting the broadcast connection. To correct this problem, you should perform the steps as follows:  

  1. At first, hit the I and Windows key both at the same time from the keyboard to open the Settings window. Else, you can also go to the Start menu and tap on the gear-shaped Settings icon.  
  2. On the next window, navigate to the ‘Network & Internet’ section. Now, choose the ‘Wi-Fi’ option under the ‘Network & Internet’ window.
  3. Next, tap on the ‘Show available networks’ option from the same window. As a result, it will show a complete list of the Wi-Fi networks that are detected by the system previously. Select any of the networks that you wish to connect from the current page.
  4. After that, right-click on the selected Wi-Fi network and choose the ‘Forget’ option from the list.
  5. To find the network and connect it you should turn the ‘Wi-Fi’ off by going to the ‘Settings’ window. Then, enter the login credentials to connect the Wi-Fi network.

After completing the above process, restart the router and check if the issue has been resolved or not. If you see that the issue still appears, then perform the further procedure discussed below.

Procedure 3: Change the Configuration Settings of the Broadcast Network

You can encounter the Netgear authentication problem also due to an incorrect IP address. Hence, you should change the configuration settings of the broadcast network to fix this problem. To do that, you need to follow the steps mentioned below:

  1. First, move the cursor to the bottom left corner of the window and tap on the Start logo. Then, tap on the gear-shaped Setting icon located above the ‘Power’ icon. It will open the ‘Settings’ window.
  2. Go to the ‘Network & Internet’ section under the Settings window. Look at the left side of the window and tap on the ‘Wi-Fi’ option. Now, on the next window, tap on the ‘Change adapter’ option by going to the ‘Related settings’ window.
  3. Next, you have to select the network adapter that is connected currently with the system and right-click on it. Then, select the ‘Properties’ option from the popup list. It will navigate you to the ‘Wi-Fi Properties’ window. Now, you will see the ‘Internet Protocol Version 4 (TCP/IPv4)’ option on the list. Click twice on it.
  4. On the next window, you will see the same option named by ‘Internet Protocol Version 4 (TCP/IPv4) Properties.’ Tap on it. Now, you should select the ‘Obtain an IP address automatically’ option. After that, click on the ‘Obtain DNS server address automatically’ option.
  5. Now, tap on the OK button. Press the Alt and F4 key simultaneously from the keyboard to exit from the current window.

After that, restart the system to apply the changes. Now, you should try to connect the Wi-Fi network to check whether the issue has been fixed or not. If the problem still persists, then go to the next solution.

Procedure 4: Change the Wrong Credentials of the Wi-Fi Network

If you enter wrong passwords which do not suit the present database, then you can meet the ‘Netgear authentication problem’ issue. To fix this problem, you have to follow the steps given below:  

  1. At first, select the broadcast network where you have entered the incorrect login credentials by going to the Wi-Fi icon on the taskbar.
  2. After that, right-click on the Wi-Fi icon and tap on the ‘Forget’ option to eliminate the login credentials of the wireless network.
  3. Now, turn the Wi-Fi network off and then wait for a few minutes. Then, turn the Wi-Fi network on. Pick the broadcast network from the list which you prefer to connect.
  4. Next, you have to enter the password of the login credential which is ‘Password’. Try to enter the right password to connect with the broadcast network.

After that, you should restart the system to save the changes. Try to connect the network to check whether the issue persists or not. If the issue still appears, then perform the further procedure.

Procedure 5: Perform a Factory Reset of the Netgear Router

After trying all the solutions above, if you are still not able to connect the system with the wireless network, then the last option that you should perform is a factory reset of your Netgear router. To perform this, you should follow the steps given below:

  1. While turning the router on, you should go back side of the router. There you will see a hole or small button labeled by ‘Reset.’
  2. After that, either insert a clip on the hole or click the button. Hold it for at least 10 seconds until you will see that the ‘Power’ light started to blink.
  3. After waiting 10 seconds, you should release it. Now, wait until the ‘Power’ light to become stable.
  4. Once the power light is stable, it indicates that the router is set to the default settings. Hence, now you can easily adjust the configuration settings as you wish.  

After that, restart the router and try to connect with the system to check whether the ‘Netgear authentication problem’ issue is resolved.

Final Recommendation

In the above guide, we have discussed some of the possible ways to fix the Netgear authentication problem. We hope if you implement the above-mentioned ways in their corresponding order, then it will definitely help you to put an end to this bug. After successfully performing the above methods, if you are still facing any other kinds of trouble, then you need to seek help from a tech expert for further assistance. In addition, you can also share your queries and valuable feedback through the comment box given at the end of this post.