Category Archives: cisco router

11Jun/19

All About Cisco Router Port Forwarding Methods

Port forwarding helps us to launch the ports with inbound traffic for some particular services. As an example, we can tell you that, if you are hosting any of the web servers with your LAN port, then you will be able to set up a port forwarding. This can, in addition, can help you to control the HTTP traffic.

Port forwarding is a service by which any of the gateway or other related devices can convey all of the incoming information/ traffic to an appropriate port in a private network node. If you want to use the port forwarding service in your Cisco router. And if you are looking for the methods that can help you to configure port forwarding on the Cisco Router. Then, let’s have a look at our article. Here we are going to discuss the steps of Cisco router port forwarding procedure.

How to Configure Port Forwarding on Cisco Router in Easy Steps?

If you are looking for the answer on “how to configure port forwarding on Cisco router?” Then, here we are going to provide you with what you want.

In this part of the article, we are going to discuss the steps that can help you to learn the procedure of configuring port forward on the Cisco Router. Hence, go through the steps that you come across in the upcoming part of the article to know the details on it.

If you want to forward the port/ports to some other network, then, you must need to go through two different stages.

First, your device needs to obtain a static IP address. Then, you have to configure the port forwarding feature in your Cisco router. The steps which follow, will help you to do so.

Step 1: Get a Static IP Address?

To configure the port forwarding feature in your Cisco router, you first need to assign a static IP address in your device. And for this, keep following:

  1. At first, go to the lower left side on your computer screen and click on the Start button. Then, click on the Search bar and write down cmd. Then, hit the Enter button from your keyboard.
  2. After that, write down ipconfig /all in the appearing Window and hit the Enter button.
  3. Then, note down the subsequent digits that are registered under the network connection. Which are followed by
    IPv4 Address (or IP Address)
    Subnet Mask
    Default Gateway
    DNS Servers
  4. Now, launch the Control Panel and click on the Network and Internet option. Then, select the Network and Sharing Center, that you can find it on the left-hand side of your computer screen.
  5. Thereafter, click on the Change adapter settings option and right click on the Local Area Connection. Then, select the Properties option.
  6. Then, a list will appear on your screen and choose the Internet Protocol Version. Thereafter, again choose the Properties button.
  7. After that, click on the “Use the following IP address” option. Then, add the binary number 10 in the latest figure of the Default Gateway number, and then put it in the IP address field.
  8. Furthermore, you will need to proceed with the next step by entering the numbers of the Subnet Mask, Default Gateway, and DNS Servers. And select the OK button. Then, proceed with the next steps.

Step 2: Procedure to Configure Port Forwarding on Cisco Router

Once you are done with the step which is mentioned before, now you will be able to configure port forwarding on your Cisco router. Hence, to do this, take a glance down the steps:

  1. At first, you will need to open your preferred web browser on your computer. Then, write down the Default Gateway number in the address bar and hit the Enter button from your keyboard.
  2. Then, you will need to enter your providing username and password. This will help you to access the router’s interface.
  3. Thereafter, find out “Applications and Gaming,” “Advanced,” “Port Forwarding/ Port Triggering,” “NAT/ QoS,” or the tabs that are similar like these options.
  4. After that, you will need to access the gate that you want to launch under Internal and External. Otherwise, you can enter the range of ports that you want to launch following Start and End.
  5. Now, select the Protocol which is TCP, UDP, or you can select both of them.
  6. Furthermore, you will need to proceed with the next step by entering the static IP address that you have made before.
  7. Then, verify if it is Enabled or not. And go to the Application section and enter a name as per your choice. Thereafter, click on the Save button to save the changes that you have made.
  8. Now, you are done with port forwarding successfully.

Summing it Up

Through this article, we have provided you the method that can help you to configure Cisco router port forwarding. Follow the steps that we have mentioned through our guidance and forward your port successfully. If you have any more questions regarding this topic, then you can comment us on our comment section.

11Jun/19

Fix The Cisco Router Not Working With Effective Guidelines

Cisco is one of the best companies present in the market that makes a variety of networking devices like routers, modem, etc. All the routers from this company have a plethora of different features and services. Despite the fact that Cisco routers have many distinct features, even then you face a variety of problems over time. One common issue that you often get is the “Cisco router not working”.

Basically, you face this issue when there is no internet connectivity from the ISP. There are many reasons for the occurrence of this issue. If there is a blockage in the wireless connectivity of the router, then you can face this problem.

Even, when the frequency of the WiFi network is not correctly set, then also there is a possibility for you to encounter this glitch. Moreover, if the WiFi Driver is not up to date, this error occurs.

Useful Method to Resolve the Cisco Router Problems

In this article, we will provide some efficient and effective solutions which will help you to remove the “Cisco router not working” issue.

Restart the Router

The primary solution to resolve this problem is to restart both the router and the connected device. Here is the process on how to do it:

  • First, turn off the power of both the router and the PC. Then, remove the power cable of both these devices from the wall socket.
  • Also, unplug ‘Ethernet’ cables from the back of both these devices and then wait for thirty seconds.
  • After that, put back the ‘Ethernet’ cables to their actual places.
  • Finally, turn on the router and the PC both.

Alter the WiFi Frequency of the Router

Sometimes, you can get this “Cisco router not working” issue, if the frequency of the wireless network is not set correctly. Thus, the best solution is to change the WiFi frequency that the router can accept. Here are the steps –

  • First, launch a web browser. Then, on the URL bar, type “192.168.1.1” and press the ‘Enter’ key.
  • This will open the router login page. Leave the ‘Username’ field blank, and on the ‘Password’ field, type ‘admin’. Next, tap the ‘OK’ button.
  • Now, the router configuration page will open up. Within that page, go to the left panel and then choose the ‘Wireless’ option. This action will open the ‘Wireless Settings’ page.
  • Now, under this section, locate ‘Channel’. Then, from the drop-down menu, select either the ‘2.4GHz’ or ‘5GHz’ according to the user traffic.
  • Next, tap on the ‘Save’ button and then exit from the router settings page.
  • Lastly, see if the router is working properly or not.

Remove any Obstruction that Blocks the WiFi Signal

You can face the “Cisco router WiFi not working” problem if some kind of obstruction like wall or floor blocks the signal. In that case, here’s what you should do –

  • First, keep the router at the center of your house so that you can get a good wireless signal.
  • Also, make sure that there are no blockages which cover the router.
  • Do not keep the router close to the wall or ceiling. Keep a distance of two feet and see if the connection improves or not.
  • If there are any devices like television, cordless phone, microwave that are near the router, then remove them.

Activate the WLAN AutoConfig Service

When the WLAN AutoConfig service is obsolete, then you face this problem. The service WLAN AutoConfig is used to configure the connectivity settings and wireless security. To activate this service, follow these steps:

  • First, hit the combination of ‘Windows + R’ keys to open the’Run’ dialog box.
  • Within that dialog box, type “services.msc” and tap on the ‘OK’ button.
  • At this moment, you will get a new ‘Services’ window in it. There will be services for all the programs installed within the computer in a list.
  • Next, from that list, locate and select the ‘WLAN AutoConfig’ service. After that, right-click on the service and then from the popup menu, choose the option ‘Properties’.
  • This will open a new window with the name ‘WLAN AutoConfig Properties (Local Computer). Inside that window, select the ‘General’ tab. Under that tab, go to the section ‘Startup type:’. From the drop-down menu, select the ‘Automatic’ option.
  • Next, at the bottom of this window, tap on ‘Apply’ and then ‘OK’ to confirm any changes to the computer.

WiFi Service Activation Process

When the Windows Operating System deactivates the WiFi service, then for that cause, you can get the “Cisco router not working”. Here are the steps to activate WiFi Service:

  • First, find and then choose the ‘Network’ icon from the lower right side of the taskbar. Then, right-click on it and then choose ‘Open Network and Sharing Center’ from the popup menu that comes up.
  • When the ‘Network and Sharing Center’ window shows up, go to the left panel.
  • After that, from the left pane, choose the ‘change adapter settings’ link. This will launch ‘Network Connections’.
  • On that page, locate the wireless network to which you are currently connected. Then, right-click on the chosen network and select the ‘Enable’ option. If the network is active already, then ‘Disable’ it. Then, ‘Enable’ it again.
  • After the WiFi Service is active, reboot the computer and see if the Cisco router works or not.

Update the Wireless Network Driver

If the Wireless Network Driver is not up to date, then there is a high probability for you to encounter this problem. Now, the feasible solution to rectify this issue is to update the WiFi Driver. In order to do it, follow the simple steps provided beneath.

  1. First, right-click on the ‘Windows logo’ to open the ‘Option Menu’. After that, select the ‘Device Manager’ option from the menu.
  2. Now, inside this window, you will get all the devices and their respective drivers within a list.
  3. From that list, locate and choose “Network Adapters”. After that, tap on the ‘arrow’ icon on the front of the device category to reveal an expanded sub-list. This list contains the driver ‘Network Adapters’.
  4. From the expanded sub-list, choose the initial driver and then right-click on it. Then, from the popup menu, choose the ‘Update driver’ option.
  5. At this moment, a new window will appear with two links. Choose ‘Search automatically for updated driver software’.
  6. Now, if there is any kind of updates present, then that will be downloaded and installed automatically. This procedure can take some time to complete. So, wait patiently.
  7. Then, simply reboot the machine.
  8. Finally, after the computer boots up, examine if you are still facing this issue or not.

Epilogue

With this article, it will be pretty easy to eradicate the “Cisco router not working” error. But, even after following every method, if you are unable to mitigate this issue, then no need to worry. Just contact a professional to fix the issue.

17May/19

How to Configure a Cisco Router? The Simple Method

Network routers are the go-to for most people looking to get a high-speed internet connection. This is where Cisco comes in. With some of the best quality network routers that you can find in the market today. You can find Cisco routers in the homes and offices of people around the world.

No matter what the need might be of the customer, Cisco has something for everybody’s needs.  And in case, you have got yourself one of these fantastic network devices. Then, you might want to concoct a strong internet connection right away. Therefore, we are going to show you “how to configure a Cisco router?”

Once you follow the instructions and set your Cisco router up. Then, will you be able to enjoy the high-speed internet that you brought it for? But, as a matter of fact, we are going to cover some more details to help you perform this setup.

Reasons You Need to Know “How to Configure a Cisco Router?”

Before we go ahead and get into all the instructions you will need to configure your Cisco router. It is very important to know the reason why you might want to do this.

Cisco routers being some of the best routers that you can buy from the market. They are rather complicated devices, and in order to work, they need a lot of things working right. That is what makes a high-speed internet connection possible. Along with that, a lot of other features that are there.

In order to make that work properly, you have to know how to configure a Cisco router. And then, you will have to do it properly to make use of all those features.

But, there is another benefit that you are going to get if you do the setup properly. As we already mentioned that your Cisco router is a very complex device. So, because of that, many issues can develop in the system which will cause certain technical glitches in the future.

If you can properly configure your Cisco network router from the get-go. Then, you will be able to avoid a lot of those issues that might have come your way. This is going to save you a lot more time later on. Only if you just take a few minutes to configure the router properly.

How to Configure a Cisco Router in the Easiest Possible Manner?

After learning why you should carry out this setup process for your Cisco router. It is time to take a look at the technical part of the process.

So, here are the steps you need to configure a Cisco router.

Initiate a Terminal Emulation Program after Connecting the Router to the PC

You will have to connect your router to your computer and establish an active connection from there. It is going to be important for you to make that connection. As you are going to need for the setup process.

Use the Enable command to access the privileged EXEC mode, follow up with the erase command. Add the erase startup-config command after that to bring up a blank configuration.

After this, just restart your Cisco router with the reload command.

In case you get an IOS Prompt from the system, then make sure to click the No button for that. Now, that you have done this, it is time to take a look at the next step on this list.

Figure Out which ones are the Router’s Interfaces

Take a look at the Ethernet ports on the back side of the router. You will see that there are 4 ports for connecting LAN and 1 for connecting to the modem.

In case you do not see any label for that, just type the command show ip interface brief. It is going to be there in privileged EXEC mode.

After this, move on to the next step in the process.

Configure All of your IP Addresses

Here is where you are going to be starting the main part of the setup process. First, you will have to start the terminal configuration mode. To do that, type in the configure terminal command.

After that, type in the “no ip domain lookup” command and hit the Enter key after that. To stop the IOS from reading minor spelling mistakes as issues with the domain. Also, you will have to type in the no logging console command.

On the other hand, if you want to stop the IOS from making syslog message outputs to the console.

Now, it is time to set up the IP address for the interface of the LAN connection. Type in the “interface” command into that window and then enter interface BVI1 command.

After this, you will have to set the IP address from the interface and for that enter ip address.

From here, you will need to configure the WAN interface. So that, you can use DHCP to get to the IP address. Type in the commands interface FastEthernet4, then exit and finally, ip address dhcp, one after another.

Configure all the Access Lists

For this step, you will have to configure 2 different access lists. And these are going to be in the inbound direction.

It is because the traffic is going to come towards the device from your Cisco router. So, after you have set up the 2 access lists, move on to the next step.

Set the Basic TCP/UDP/ICMP Inspection Paths Up

The first thing you need to set up is the threshold for TCP SYN timeout. This is going to help counter the SYN flood DoS attacks.

For this, enter the ip tcp synwait-time 30 command. This makes the iOS forfeit any TCP session which does not happen within a span of 30 seconds.

After this, you will have to set the rules for ICMP, TCP and UDP individually. The commands that you are going to need are the following.

IP inspect name InspectRule icmp, ip inspect name InspectRule tcp and ip inspect name InspectRule udp.

Now, move on to the step after this.

Apply All of the Rules from the Previous Steps

After you have set up all the access lists and the TCP/UDP/ICMP inspection path rules. It is now time we apply them for the right interfaces going inbound.

First, open up the interface configuration mode with the interface FastEthernet4 command.

Now, in order to apply the access list, type in the command ip access-group 101 in. And after that, type in the ip inspect InspectRule in command to apply this inspection rule.

With that, we complete the first section of this step. And to get out of the interface configuration mode. Type in the command exit and you will be out of that.

After this, it is time to do similar for the LAN interface and here are the commands you need –

interface BVI1, ip access-group 100 in, ip inspect InspectRule in, and exit.

Thus, you have applied the rules in the inbound direction.

Configure the NAT

This step is a crucial one within the entire run. It is the NAT which translates into between the public internet and the internal 192.168.100.0/24 network.

For this, it is important to set an access list which will only be for the NAT to use. Here are all the commands you will need for that –

IP access-list standard 10, permit 192.168.100.0 0.0.0.255, deny any, and exit.

Now, you will have to figure out which of the interfaces are going to take part in the NAT. To do that, enter the following commands in the order as you see it.

interface BVI1, ip nat inside, exit, interface FastEthernet4, ip nat outside, and exit.

Now after all these commands, it is time to put in the real NAT statement through the following command.

IP nat inside source list 10, interface FastEthernet4 overload.

Deactivate the STP and Activate Interfaces

For the penultimate step of the Cisco router configuration process. You are going to have to activate interfaces and deactivate the STP.

If you happen to have the Fast Ethernet type, then the commands for that will be –

interface FastEthernet4, no shutdown, and exit.

Keep in mind that you are going to have to do this for all the interfaces of your router. And that is going to activate all those router interfaces.

Now, for the other part of this step. You will have to deactivate the Spanning Tree Protocol, or in short the STP.

You will not have to do this if you will use your Cisco router in an office setting or similar. As for complex network layouts, this protocol can prove to be very useful.

Following are the commands that you are going to need to deactivate the STP.

interface FastEthernet0, spanning-tree portfast, and exit.

Put the New Configuration to Test

After all the steps for “how to configure a Cisco router?” that you have carried out by now. You have set up your Cisco router, but it is going to be very important to test the configuration out.

Type in the copy running-config startup-config command. This is going to save all the new settings that you have made in the nonvolatile memory. That way, after your Cisco router restarts, all these settings are going to be there.

After that, enter the show running-config command. This will display the details of the new configuration on the screen.

Conclusion

This completes all the necessary instructions if you want to know “how to configure a Cisco router?” After you have successfully carried out all the steps from this instructional. You are now ready to connect the Ethernet cable to the WAN port of your Cisco router.

And with that, you will be able to enjoy a high-speed internet connection. You can use it through either the wire connections from the LAN ports. Or you can go for the more common wireless Wifi medium.

09Oct/17
cisco wireless router keeps disconnecting Issue

How To Fix cisco wireless router keeps disconnecting Issue?

We all know how much important is wireless router nowadays. To connect to the outer world, it has become essential to have uninterrupted WiFi connectivity at your disposal. Wireless connectivity or Wi-Fi has gained its importance in our daily lives rapidly. With rapid technological advancements, wireless connections introduced a newer and better level of communication.

However, router disconnecting issue can be irritating at times. Users face issues like how to fix Cisco wireless router keeps disconnecting Issue. Therefore, it is advisable to opt for our expert support at Cisco customer support to avail efficient wireless networking solutions for instant help.

wireless signal. Also what makes this router highly famous is that it provides users with a good support features for sharing documents quickly and into the much easier process. But issues may arise anytime while we are working. One such issue is disconnecting problems that arise due to corrupted driver technical faults as well as connection issues. Well, we have jotted down few ways to fix Cisco wireless router keeps disconnecting issue and here is what we recommend.

Probable reasons for which Cisco wireless router keeps disconnecting:

There can be numerous reasons which lead to the disconnecting issue. To have an uninterrupted router session, you should always trust the experts in case of such errors. The possible reasons are listed below:

  • The user might be out of connection range
  • Wifi network issues
  • Improper configuration settings
  • The wrong password entered multiple times
  • Slow internet speed
  • Too many users connected to the same network
  • Network jamming issues

We understand these reasons are hectic for you. That is why for helping you, our pool of experts is available at your service just a call away. Feel free to reach our experts with your issues and get best-in-class solutions in your budget.

 Cisco wireless router keeps disconnecting

Steps to troubleshoot Cisco router keeps disconnecting issue

Step 1: Solution for Driver technical faults

Drivers are an essential part of the device to make it work smoothly and help the router working with ease. Well, working with the corrupted driver will definitely hamper the router’s connectivity problems to the network. If you have not installed the driver properly for the wireless card, wireless adapter and other wireless devices it will cause any router to disconnect on a frequent basis.

Solution: The only solution is to update all your drivers installed in your system and work with the most compatible drivers that will make your system run

Step 2: Solutions for connection issues

The connection issue is another cause of this problems.

Related Blog: How to Reset Cisco Wi-Fi Password?

Solution: Users while working with the Cisco router should make sure that Ethernet cables are appropriately connected to avoid the router getting disconnecting frequently. The second step is to make sure that the router settings should be accurately configured. Users are advised to update the firmware as when needed by them. Check for whether the firewall is blocking your router or not? So, always disabling the firewall till you have established a connection properly is recommended. You’re done completely.

Some Alternate easy tips to resolve Cisco wireless router keeps disconnecting issue in your budget:

Continuing with router disconnecting errors is a big no from our experts. You can try some solutions on your own to fix such router issues at your home. But if the problem continues, it can further lead to permanent damage to the router. In order to enjoy a secure internet connection, you need to set up your router with the proper configuration and installation settings. In case you still face disconnecting issues, do not delay to contact our Cisco Router Support Phone Number to get reliable solutions in your budget. Take a look at some tried and tested solutions :

  • Try to restart  Wi-Fi for better connectivity
  • Use case sensitive passwords so that it restricts the number of users
  • Facilitate easy connections with extended wiring
  • Reset your Wi-Fi settings according to your convenience
  • Restrict the number of users

You can try the above-mentioned steps to solve your issues. While using a router, you can often encounter different problems, out of which connectivity issue is the most common problem that a user can come across. Avail expert assistance and deal with these errors without overspending.  

Dial at Cisco Router Support Number to resolve your queries with our technicians’ assistance

router customer support

Whatever hard work it takes for us to resolve issues related to Cisco, we do take a true responsibility of solving issues related to Cisco routers. Our technicians working at Cisco Router Customer Support Number are always a step ahead in resolving your complex to complex router issues by delivering the most appropriate solution as needed.

Take expert help if you continue to face wireless network issues, and do not hesitate to opt for our effective services. Do not try to solve such issues on your own at home as it can further increase the problem. We try to provide the best assistance so that you can have better Wi-Fi connectivity and have an excellent router connectivity at your disposal. Our professionals guide you with the proper and required solutions so that you can have a flawless connection wherever you want.

20Apr/17

Knowing Everything About Cisco VPN Error 412

Recently users complained about the CISCO VPN Error 412 while trying to make a Remote Access VPN work in the Cisco ASA 5505 firewall section. It was seen that the VPN had been working at only single point but was used in rare cases. Well, even when users were trying to use it repeatedly, they continued to face this error. But this problem surely has solutions that were discovered by a team of Cisco Router Support Number experts.

CISCO VPN Error 412

Causes of Cisco VPN error 412

There lies wide number of reasons of Cisco VPN error 412 and they are listed below:

  • Firewall on the client side which may be blocking various un-necessary UDP or TCP ports
  • The error may be the reason of unstable internet connection such as a mobile connection. But normally, it’s due to a configuration issue on the firewall itself.

 Uses of VPNs

VPN stands for Virtually Private Network and it has two most primary uses:

  • The VPN network enhances the security of data
  • It do shares data and various installed applications on the system

Steps to Fix Cisco VPN Error 412

Step 1 – Use of Ethernet

It is recommended by Cisco Router Technical Support professionals users must try to connect by using an Ethernet or even USB connection if the client computer is connecting to the Internet with the help of WiFi connection. The process will further help in eliminating the possibility of WiFi connection where it is not providing sufficient connectivity.

Step 2 – Turn off the computer

Temporarily turning-off the computer’s firewall is highly recommended and then test the VPN connection thoroughly. If you see that the 412 error no longer occurs, then the cause of the error may be due to adding the firewall exception rules for the ESP protocol, port 500, and port 4500.

Step 3 – Turn on the NAT-T/TCP

Enable the connection of NAT-T/TCP option in your profile to ensure that the port 10000 is totally unblocked in the computer’s firewall.

Step 4 – Working with the ForceKeepAlive

Updating of the “ForceKeepAlive=0 to 1 in your own profile is highly recommended.

Step 5 – Changing the computer firewall settings

If  you find that the VPN continues to throw an error 412, then changing the computer firewall settings to allow or permit UDP ports 500 and 62515 is essential to be done by users, required for the Cisco VPN client.

Step 6 – Checking the data packets

Ensure that the Cisco VPN client is sending the data packet accurately.

router customer support

Well, I guess your headache related to Cisco VPN Error 412 has been completely resolved. But our Cisco Router Customer Support team of professionals is always there to assist you in every difficult situation as and when required. So, come and explore our industry services now! Call Now our toll-free number +1-855-789-0294to Fix Cisco VPN Error 412 windows 7 and Cisco VPN Error 412 windows 10 etc.

07Mar/17
wifi

Important Tips for Secure Your Wi-Fi Network

The Wi-Fi network of your home or office offers Wi-Fi internet connection for all of your devices such as Smartphone, tablet, and laptop, desktop PC, gaming consoles and more to connect with the internet. But the problem is that if someone steals the bandwidth from your network, then not only you lose your money but also gets slow speed, and the risk of someone stealing your confidential data.

7-tips-to-make-your-home-Wi-Fi-more-secure

To cater to this demand of our home and office users we offers highly trusted and reliable tech support for safeguarding or securing your Wi-Fi network. For more information, contact Cisco Router Technical Support.

Tips to Secure Your Wi-Fi Network

Installation of Wi-Fi Security Devices

For the safety of your home or office network, you need to use security devices to secure your Wi-Fi network from unwanted access. There are various kinds of devices and tools which are available online and as well in your nearby market to activate additional security features so that you can use your Wi-Fi devices in a highly secured environment.

Switch off Network Broadcasting

Generally Wi-Fi networks will display the network name or “SSID” to people in your neighborhood areas. They can view your network name and might be using some software will connect with the network of your home or office.

Keep Firewall Security Enable

Firewall security provides rock solid security to the users’ network. And all the latest brands of Wi-Fi routers comes with firewall security feature. Therefore switch on the Wi-Fi in the router firewall security.

Change your Wi-Fi network password periodically

For maximum safety of your network, change your Wi-Fi password at regular intervals.

Deploy MAC Address Filter

A MAC address is distinct id to inspect your device and connect with different devices. Unwanted users can not able to access your network if you modify router settings so as to activate the MAC address filter.

Why You Should Call Us?

router customer support

Dial our toll-free number +1-855-789-0294any time, round the clock for quick online assistance for all the technical issues related to the Routers. If you are looking to contact Cisco Router Customer Support to resolve your problem, please get in touch with our Router support team to get the best customer support service at highly reasonable charges.

11Feb/17

How to Connect Cisco Router To Linksys Router?

Steps to Connect Cisco Router To Linksys Router:

To enhance the range or Wi-Fi signals of the network without uninstalling your old router you can easily connect many wired and wireless devices. For this you have two connect two routers. Take a look at this blog for the detailed procedure. For instance technical help call Cisco Router Support.

cisco router

There are two different methods to connect a Cisco router with Linksys router:

cisco router support

  1. LAN to WAN: By connecting one Ethernet port of the main Cisco router to the Internet port (WAN port) of secondary Cisco router.
  2. LAN to LAN:  By connecting one Ethernet port of the Linksys router (main router) to one Ethernet port of secondary router.

Below are the detailed steps provided by our expert team to connect two routers?

By Connecting the Linksys router to Cisco router (LAN-WAN)

  • Inspect and write down the IP address of the main router.  Connect your PC to one of the Ethernet ports of the secondary router.
  • You also need to access the setup page of the secondary router. In the basic setup tab, search for IP Address.
  • Now click on the save settings. Unplug the cable from your PC and connect it to the Ethernet port in the main router.
  • Transfer the LAN cable connected to the secondary router to its WAN port.

By Connecting the Linksys router to Cisco router (LAN-LAN)

  • Inspect and write down the IP address of the main router. Connect your PC to the Ethernet port of the secondary router.
  • Access the internet setup page of the secondary router and disable the DHCP Server.
  • Then you need to click on save settings.
  • Unplug the cable from your PC and connect it to the Ethernet port on the main router.

Why Call Us?

cisco router support number

We are providing services for all types of Cisco router problems available in the market by delivering users round the clock service. So, if you are facing technical issues with your Cisco Router, then dial our Cisco Router Customer Support +1-855-789-0294 and we are here to assist you in repairing all types of Cisco Router issues at highly reasonable prices in a shorter time span . So, hurry up and get in touch with us.

 

08Feb/17
cisco icm error

Few promising steps to fix Cisco Router Icm Error Codes

If a user is experiencing a Cisco Icm Error Code, then our Cisco Router Technical Support team strongly recommends them to download and run the Cisco Icm Error Codes repair tool.

cisco router

Symptoms of Cisco Icm Error Codes

  1. Cisco Icm Error Codes will simply appear and then crash all your current program in Windows.
  2. The computer will crash on frequent basis by showing the Cisco Icm Error Codes at the time of running the same program.
  3. The Windows will run slowly and mouse as well keyboard input will behave in sluggish mode.
  4. Next, the computer will occasionally ‘freeze’ up for a period of time.

Cisco Icm Error Codes and other such critical issues might occur at the time when the Windows operating system is corrupted according to the expert level professional working at Cisco router tech support number section. Opening programs will then behave in slow mode and response time will lag. At the time of having multiple applications running on the Windows, a user might experience crashes aswell as freezes. There might be numerous numbers of causes for this error including excessive startup entries, registry errors, hardware/RAM decline, fragmented files, unnecessary or redundant program installations and so on.

Steps to Fix Cisco Router Icm Error Codes

To easily fix this Cisco Icm Error Codes, it is recommended that a user’s should download the Cisco Icm Error Codes Repair Tool first. This is depicted as an advanced optimization tool which can easily repair all these problems that are making computers slow. By using this method, a user will also dramatically improve the computer speed after addressing all the problems.

Reasons to choose us

cisco router support

Need an exceedingly adapted help for your Cisco routers? Don’t be anxious as we are here to deal with wide range of router issues like Cisco Wireless Connection, Cisco Router Settings change, Set up a Cisco wireless router with a new machine, Change Wireless settings, Connect a printer with a Cisco router and many more are there. Our cisco router customer support team works 24 hours a day with a remarkably sophisticated and consumer centric advances to transport its consumers a brilliant service at highly feasible rates related to Cisco issues. Services are offered at highly feasible rates. So, don’t wait, rely on us and make a call at our toll-free-number for any help related to Cisco issues

15Dec/16
Cisco router technical support number

How to Enhance the Range of Your Cisco Router?

The range of a Cisco wireless router is normally 33 meters or more. However many factors affects the range of Wi-Fi signal of your router. The main reasons of the interference are devices using the wireless frequencies like microwave ovens and cell phones, competing signals and metal etc. Contact +1-855-789-0294for Cisco Router Support Phone Number.

Cisco Router Support Phone number

You can boost the signal strength of your Wi-Fi router by following the methods given below:

Method 1:

Search for Disturbance

Replace the gadgets in your home that can affect the network traffic in the frequency range of 2.4 GHz. Purchase a wireless network analyzer which assists you in finding the source of disturbance. These appliances may be the reason of the problem such as: cordless phone, automatic garage door openers, television remote controls, security alarms, baby monitors, and microwave ovens. Check the signal strength of your router with these devices. Compare the power levels when each device is off and on to find if the Wi-Fi signals are weak.

Method 2:

Change Channels

Switch the channels of your signals. Routers can broadcast the channels between 1 & 11. You need to switch to that channel which provides a clear signal between different wireless networks.  

Method 3:

Deploy the 802.11n Standard

Modify the network broadcast mode of your router. If your router supports, then try by using the method 802.11 standard. The 802.11n standard provides much greater range and signal strength as compared to 802.11a/b/g.

Method 4:

Change the position of your router

Search a new place to position your router. If you are living in an apartment, then use a different channel as there may be various routers in working mode.

Method 5:

Upgrade the Hardware

Purchase and install a Wi-Fi Repeater.  A Repeater is a piece of hardware which works like a wireless network booster. The repeater accepts the signal from your router and boosts its Wi-Fi signal range.

Method 6:

Purchase a Wireless Booster

Add a wireless booster to your router directly. To boost your inward and outbound speed use a bi-directional booster.

Cisco router technical support phone number

Dial our toll-free number +1-855-789-0294any time, round the clock for quick online assistance for all the technical issues related to the Routers. If you are looking to contact Cisco router technical support phone number to resolve your problem, please get in touch with our Cisco Router support team to get the best customer support service at affordable charges.