Category Archives: Fix D-Link Router Error

08May/19

Exceptional Methods to Perform Factory Reset Dlink Router

It is frustrating enough when you are working an important task but your router starts misbehaving. As we know, Dlink manufactures quality routers but it is not free from glitches. Thus, factory reset Dlink router is quite necessary for you. By any case, if you forget the password or the username, then factory reset can help you to create a new one as well. If you are facing any sort of network issue repeatedly, then perform a factory reset and solve all of them within a minute.

Go through the entire article and implement the steps exactly the same as stated. But it is suggested not to skip any steps or make any mistake while performing the methods.

How to Reset Dlink Router to Factory Settings? One-stop Solutions

In case, if you are not able to remember your router’s password and username, then a factory reset can help you to fix that particular problem. It also speeds up enough space on your system. But keep in mind that, if you reset your router, it will clear up all the home network settings as well. Here we are going to discuss two ways to perform factory reset.

Solution 1: Using the Reset Button

This is the easiest way in order to reset your Dlink router. The very first thing that you have to do is to, turn off your computer. Afterward, unplug the router from your computer. Just wait for a couple of minutes and then attach the router with the PC. Now, look at the bottom of the router. There you will notice a Reset button. Tap and hold the Reset button for a few seconds. You can see the lights start to flicker. At the final step, power on the computer for once more and launch a web browser for verifying the internet connection.

Solution 2: Using Web-based Page Setup

By chance, if you fail to perform the first method, then go through this one.

First of all, you have to go http://192.168.2.1 in the web browser.

After that, give the password and the username in the respective fields. But remember that you cant keep it blank anymore.

After providing the credentials, proceed with the option Login.

Then, choose the Administration tab. You can find this option at the top of the window.

Next, you have to select the Factory defaults option and also tap on it.

Keep waiting for a while and you can see that the red light has stopped blinking.

At the final step, launch a browser and check if you successfully reset your router or not.

Summing Up

In this guide, we have provided you the stepwise instructions using which you can know how to reset the Dlink router to factory settings. As per our suggestion, you have to try the two methods carefully. If you are still in confusion or meeting with any complications, then try to get in touch with a professional by giving your valuable feedback. Moreover, if the article is beneficial for you, then share your experience with us. We will be happy to know your feedback.

17Apr/19

How to Update Dlink Router Firmware? A Thorough Guide

Dlink routers have always been the sheer winner in this global market. It can connect more than five devices at a time and also maintain the speed as well. Therefore, it is necessary to update the firmware of the router on a regular basis so that it can help to improve the connectivity, and boosts up the performance. In case, you are not aware of how to update Dlink router firmware then read this article thoroughly.

Also looking for the perfect hacks that will help you? Here, in this guide, you will find the most proficient methods that are tested by the experts. Thus, have a deep look at the entire section of the document and mitigate your queries as early as possible.

How to Update Dlink Router Firmware?

Updating the router’s firmware will not be a difficult task for you if you know the basic fundamentals. Moreover, if you update the firmware regularly then it might help you to run the router smoothly. Keeping that in the mind we are going to illustrate some practical methods that will help you to update the firmware of your Dlink router.

Method 1: Locate IPv4 Default Gateway Entry

This method is quite lengthy but at the same time, it is one of the most effective ones for updating the firmware of your Dlink router. First of all, you need to verify the router for the address. Afterward, access your computer for displaying the IP address in the web browser you are using. But if you could not find the option, then keep following the steps mentioned underneath:

  1. At first, tap on the start menu and navigate to the Search box.
  2. After that, select “Network Status” and then click on the “View network status and tasks” option as well.
  3. Then, you can see the connection list. But you have to tick on the current connection that is found at the right side of the screen.
  4. Now, choose Ethernet or WiFi and also the network connection that is connected with your router.
  5. Then, select Details by clicking on it.
  6. After that, navigate to the “IPv4 Default Gateway entry” and look at the IP address as well.
  7. Finally, check if you successfully updated the router’s firmware or not.

Method 2: By Running the .exe File

In case the first method is not applicable for you then, you try out this method. First of all, visit www.Dlink.com/support and tap on the Enter button. After that, go to the Search box and there you have to put the model number of the router. If you find a drop-down menu then, choose the desired router mode. But if you are unable to see it, then choose a product category for getting the model name. Then, tap on the Firmware and Software Downloads and choose the firmware version that you want to download. Next, tap on the Download icon and let it download completely. Then, you have to unzip the downloaded file and execute the .exe file. Go through the instructions that are showing on the screen to complete the Dlink router firmware update process.

Final Words

We assume that the above two methods are helpful to know how to update Dlink router firmware. But in case if you face any sort of difficulties while performing the process, then you can get in touch with the experts. If the article is profitable for you then in order to do the update then write your comment in the feedback box.

17Mar/19

Is Your Dlink Router Not Working? Implement Proven Methods To Eradicate The Error

Dlink is one of the global networking company who delivers high-quality router. Dlink routers offer a great user-friendly interface that makes it more reliable. Despite its brilliant features, you may encounter Dlink router not working error quite often. This particular issue not only occurs with the old router but sometimes even after purchasing a new router, users face the same error. You will not be able to connect to the internet if the error appears.

Unfortunately, if you are also encountering the same issue then this is the right place to get rid of the problem without any delay. In case you are unaware of the solutions, then this article is the ultimate choice of yours. Follow each and every solution and fix the problem on your own.

Dlink Router not Working? Know the Probable Reasons

There are several causes that are responsible for encountering this router not working issue. Hence, it is necessary to find out the reasons in order to resolve the problem efficiently. Therefore, take a look below:

  • By any case, if you are connected with an unstable network then it is quite possible that your Dlink router stops working. An unexpected breakdown of internet connectivity restricts you to work properly with your router.
  • If there is any hardware related problem with the LED or the router, then also you can face the same issue. On such case, you have to go to the login page and check the status of your router as well.
  • Due to any problems with the power supply such as hardware impairment with the power cable can also be the reason for Dlink router not working issue.
  • If your device gets attacked by virus or malware then it is pretty possible that you can also encounter the same glitch with your Dlink router.

Easy ways to Repair when you find Dlink Router not Working:

Here in this section, we are going to discuss some effective methods that can help you to solve the issue. Have a deep look at the entire section and follow one by one.

Solution 1: Basic Troubleshooting

This is the primary method to fix the issue quickly. The first and foremost thing that you have to do is to, detach the power cable and keep waiting for 30 seconds and then plug in the cable again. Now, you have to restart your router for the first time. After a few minutes, switch on both of your router and the computer. Finally, check if your Dlink router is now working or not.

Solution 2: Check WiFi Security Settings

In case if you are using a wireless router then this is the perfect solution to fix the Dlink router wireless not working issue. But if you are using wired router then it is recommended to ignore the steps.

  1. First of all, tap on the Wireless option and then choose the Encryption.
  2. After that, click on the drop-down arrow and choose Security Mode as well.
  3. In case if you find the option is selected as disabled then you have to enable it.
  4. Now, select one of the menus such as “64bit WEP,” “128bit WEP,” “WEP/PA2-Personal,” “WPA PSK” or the “WEP” or “WPA” mode.
  5. At the last step, navigate to the Taskbar and select Wireless option. Then, you have to click on the “Connect” icon and also verify if the problem with the Dlink router gets fixed or still showing.

Solution 3: Create a new Connection with Dlink Router

In case if the above methods are not helpful for you then follow this one.

  • At first, you have to do is to, execute the Dlink router login.
  • Then, choose the adapter settings option by clicking on it.
  • Now, disable that icon and enable it for once more time. It will help you to solve the issue.
  • Afterward, you need to set up both the IPv4 and Internet Protocol to Automatic.
  • Now, exit from the present window and check if you are still getting the same or not.

Bottom Line…

We assume that this entire tutorial will guide you to get rid of the Dlink router wireless not working issue. But if you still need any further help then we recommend you to consult with an expert and get the most proficient tricks. Moreover, you can also leave your valuable feedback in the comment box that is given below.

14Jun/18
Router Error

How To Reset And Troubleshoot D-link Range Extender?

The blog here will teach users how to Reset and Troubleshoot D-Link Range Extender by applying easy steps as discussed below.  One needs to unplug their device Range Extender from the Power Outlet and wait for a while or two minutes.

Steps to Reset and Troubleshoot D-Link Range Extender:

Reset And Troubleshoot D-link Range Extender

Step 1: Restart the modem as well as router to try to connect your Extender while checking the modem connection

Step 2:  If users are working with a D-Link Range extender then the technical issue may be on the device. So here to Reset and Troubleshoot D-Link Range Extender, you need to plug in the D-Link Range Extender into the power outlet. Keep your device on and its color will depend on what colors does the D-Link Range Extender is showings

Step 3: As per as D-Link Router Support Service team is concerned, its bottom side of it will be a pinhole button which will be a reset button. Work with the Paperclip to press it and hold it for next 10 seconds unless the LED starts blinking.  It will show up with another color such as Green or Blue or Orange.

Step 4: The D-Link Range Extender will reboot now and will further reset to its factory default settings. The setup is now ready to work. Setting your D-Link Range Extender is considered as same.

Step 5: Many times resetting the D-Link Range Extender can be a bit of a headache and here we should try to troubleshoot the above problem in a proper way

For more such queries, connect with our team and get the most accepted solution at your desk!

Router-Customer-Support-Number

We are working 24/7 hours at +1-800-966-6991 D-Link Router Support Number team. Who are always ready to spread their hands to its customers and help them out. Study every issue and get these problems resolve completely at your desk. Place a call at our end and get the most accepted solution

11Apr/18

How To Fix D-Link Router Please Input The Username Error Message?

The issue is caused due to username field which is already populated with their default user name and however there is no way to change it. So, fix D-Link router input the username error message with our adept technical guidelines available at our end. Let us have a look on below fixes that are explained by tech support engineers.

Steps to fix D-Link router please input the username error message are

Fix D-Link Router Please Input The Username Error Message

Step 1: The most effective hack to fix D-Link router please input the username error message is simply by pressing “enter” button when users are working in the login screen. Now, try to place the cursor in a password field and enter the password which should be appropriate. So ensure that you are not clicking on the “Login button” by hovering the mouse. Rather, press “enter” button on the keyword which will help users log in.

Step 2: This is the second step as suggested by D-Link Router Support team where they need to work with Default password.  However if users do not remember the password for their “mydilink wireless router” then, the only choice is to reset their router to its factory defaults. It is well advised to work with the pin and press it for few seconds on the reset hole, located just inside the router. Hold down the pin and press it until the power button is blinking. Users should now allow one minute time to reset the router and switch it on.

Related Blog : How to Fix D-Link Router Common Issues?

Step 3: This is the third step where default password for DLink router should be in empty state. After users have reset it, they should try to login. Now, leave the password field in blank mode.

Top reasons to approach our tech support solutions are as follows

  • 24/7*365 days tech support assistance delivered to customers as and whenever needed
  • Experienced, skilled and competent professionals
  • Future effective solutions
  • Highly dedicated and never distracted technical support assistance delivered by our technicians
  • We know how to customize every solution to fit every individual customer’s business needs
  • Scientifically proven assistance delivered
  • Customers across the country are targeted
  • Our innovative assessments are purely adapted to every customer challenges
  • Services are appreciated worldwide

Connect to our technicians and have us solve your related issues from the core!

Router-Customer-Support-NumberWe are backed by skilled and competent tech support team who are always available to provide instant assistance to customers at +1-800-966-6991 D-Link Router Support Number. Fix your related issues by applying our most advanced and industry matched solutions for your technical glitches occurring in D-Link routers. Feel free to connect with us anytime.

27Sep/17

How to Fix D-Link Router Common Issues?

The D-Link router comes with highly advanced network connectivity features which has full capability to transfer data between systems to system. Its sharp antenna technology makes it broadcast several data streams which allows users to obtain wireless signals in the extreme corners of their home. But the router can also suffer from unexpected technical fault such as installation issues and configuration problems. Well, below are few Steps to Fix D-Link Router Common Issues with absolute solution. Continue reading

16Sep/17

How to Fix D-Link USB Modem Error Code 692?

The error code 692 in D-Link indicating that there was a hardware failure in the modem or other connecting devices. This error usually occurs when connecting to the internet via using a dial-up connection or via using Broadband and Mobile Broadband too.  Error 692 can be caused by various reasons, includes a corrupt or incorrectly installed modem driver, a hardware fault, when other software running in the background of your computer, modem .inf files become corrupted, Older drivers for the device for Windows, and firmware update issue, etc. Then you do not need to worry about it, as this error could be easily fixed that suggested by the D-Link tech support team. Here, the blog will describe you very steps on How to Fix D-Link USB Modem Error Code 692. So you just need to attempt the troubleshooting steps that are given below.

Fix D-Link USB Modem Error Code 692

Steps to Fix D-Link USB Modem Error Code 692

Step1:-Check your Modem Drivers

  • First, you should try to check your modem drivers and its connections.
  • If you have an external modem, then verify check your cables and plugs are firmly secured and then restart your modem.
  • Also, try unplugging everything from all the jack points in your house, garage, and any sleep-outs. This includes, Filters, Broadband modems, Extension cables, double adaptors, Cordless and Corded phones, Computers on dial-up, and Faxes, and so on.
  • Once you have unplugged everything wait for 50-60 seconds, and then check the error is resolved.

Step 2: -Check Your Internet Connection

Many times, Error code 692 in D-link router occurs due to cause of slow Internet Connection, temporarily failed Internet Connection, or not the availability of internet connection. So you should check your internet connection that is working properly or not.

Step 3:- Restart PC

After checking the internet connection, you should try to restart your PC.  Then open the PC as well as D-Link Router, and check the error is occurring. If yes, then go to the next step.

Related Blog: How To Fix D-Link Router Errors 103 |104 |105

Step 4:- Ensure that Any Software Running in the Background

You have to need to ensure that there is no fax software running in the background of your computer as sometimes this software can cause error 692.

Step 5:- check PC 3rd Party Security Software Configurations

Also, you have to need to check PC 3rd Party Security Software Configurations. Try to turn off all antivirus and firewall programs on your PC while testing the D-Link router.

I hope your problem is resolved. But in case, if the problem continues, then it’s the best recommendation for you to take experts help to fix it.

Contact D-Link Customer Support Phone Number Team For Assistance

router customer support

You can contact feel free contact at D-Link Customer Support Phone Number +1-800-966-6991 to speedily connect with the team of certified and experienced technicians. This number is available 24*7 days, so you can easily talk with the dedicated techies, who will deliver you the reliable solution or step to fix this error. You can also gain the hasty support & services to your D-Link router related technical difficulties in a short period of time. Hence, grab the immediate help by connecting proficient professionals to D-Link Router mishaps.