Factory Reset Belkin Router: A Complete Guide

If you have forgotten the password of your Belkin router, then one feasible way to get rid of this situation is to factory reset Belkin router. The steps to reset the Belkin router are very easy to follow and you can learn it from this article. Here, you will get to learn the two different methods to reset the Belkin router and are as follows: a) Hard Reset Belkin Router, and b) Reset Router via Belkin Setup Page.

Benefits of the Factory Resetting Belkin Router:

There are several benefits you can take advantage of the factory reset Belkin router and are as follows:

  • If you forgot the password of the Belkin router, then the hard reset is the only way to solve the problem.
  • Anything wrong with the settings of the router can be resolved by the factory reset Belkin router process.

How to Factory Reset Belkin Router? Avail the Complete Methods

There are two different methods to factory reset Belkin router and are as follows:

  • Hard Reset Belkin Router
  • Reset Router via Belkin Setup Page

To know the complete steps of both of the methods of the Belkin router reset process you need to read the steps of each of the sections as explained below:

Steps to Hard Reset Belkin Router

Hard Reset is the only option, you need to proceed with if you forgot the password of your Belkin router. And the steps to follow to hard reset the Belkin router are as follows:

Step 1: Shut Down Your Computer

First of all, you need to turn off your PC. If you are using an older version of Windows, then tap the Windows key at first, and then click on the “Shut down” option. However, if you are a Windows 10 user, then you need to click on the Power icon from the left-hand side panel, after tapping the Windows button. Next, from the menu window select the “Shut down” option.

Step 2: Turn off the Power Supply

After shutting down your PC, switch off the Power for both the router and the PC, to ensure no current flow via the wires.

Step 3: Disconnect Wires from the Belkin Router

Next, disconnect all the wires from the router, except the Power cable.

And then, switch on the power supply for the router.

Step 4: Locate the Reset Button

Further, locate the reset button of the router. In general, the reset button of the router is placed at the rear portion of the device. A tiny hole with the Reset note near to it is the reset button of the router.

Step 5: Press and Hold the Reset Button

Now, take a thin pin (Paper Clip) to press and hold the reset button. Keep the reset button pressed, until the power indicator shows the red light solid. The solid red light on the power indicator is the symbol that the reset is done successfully.

Step 6: Reconnect the Wires on the Belkin Router

Further, switch off the power for the router.

Next, connect the cables back to the router, to their actual ports, you can now take the help of the guide which comes with the router for the process.

Step 7: Turn on the Power Supply

After you connect the cables correctly, in their proper locations. Now, turn on the power for both the PC and the router. Then, wait until the PC is completely on and the lights on the router become stable.

Step 8: Verify the Success of the Factory Reset Belkin Router

Now, you need to begin to connect with the internet via the Belkin router, as you have done at the beginning when you have bought it.

That is the complete procedure to hard reset the Belkin router. Now, you are eligible to login into your Belkin account using the default username and password for the router.

The default Username for the Belkin router is admin and in the place of the Password, you need to keep the space blank.

Steps to Reset Router via Belkin Setup Page

To reset the Belkin router via the setup wizard, the steps you need to follow, are as explained below. It is advised to read the steps before so that, during following the instructions you will not get stuck in any step.

Step1: Login into Your Belkin Account

To login into your Belkin account, at first, you need to know the IP address of your router. And the steps to follow to know your Belkin router IP address is simple and are as below:

Note: You need to keep the Belkin router connected with the PC via the Ethernet cable to do this task.

Know Your Belkin Router IP Address

Press the Windows and the letter R key simultaneously to open the Run bar window. After that, on the Run bar enter “cmd” without the quotations. Next, hit the Enter key to open the black background Command Prompt window on the screen. Now, on the Command Prompt window, you need to type ipconfig. Then, press the Enter key to get the required information generated on the Command Prompt window.

From the generated information, find the Default Gateway section. The number which you get beside Default Gateway is the IP address of the Belkin router. Note down the IP address of your Belkin router, for further use. 192.168.1.1 is an example of an IP address of the Belkin router. Check your’s, with the help of these above steps, and then proceed further.

Now, open a browser on your PC. After that, at the address bar of the browser, enter the IP address of your Belkin router. Next, hit the Enter button, to navigate to the Belkin login page. Here, you need to fill up the Password of your Belkin account. If you have not changed the details, then you need to keep the Password space blank. Then, click on the Submit button, to login into your Belkin account.

Step 2: Utilities (Restore Factory Defaults)> Restore Defaults> OK> OK

After you login into your Belkin account, the next step is, to click on the “Restore Factory Details” option from the left-hand side panel, that is present below the “Utilities” section. Then, from the next window, click on the “Restore Defaults” button. After that, select OK of the “Message from webpage” window. Again click on OK, to confirm. By following all these steps, on the window, you will see the “Applying changes, Please wait…” message on the screen. Now, wait, until the countdown is over and the Belkin window gets open. That is the overall process to factory reset Belkin router.

To learn the factory reset Belkin router steps in a simple manner, this article will be your perfect choice. Hopefully, after going through this article, you will get the success in resetting your Belkin router efficiently.